What is a static head measurement? Evaluating structural error and implications for regional groundwater modeling

Most groundwater modelers avoid using static heads measured from active production wells because they can introduce a bias into model calibration. However, in the deep confined Cambrian-Ordovician Sandstone Aquifer System in the Central Midcontinent of North America, dedicated observation wells are sparse and remote from areas of most concentrated pumping. As a result, in areas where drawdown is the greatest and modeling is most needed, only static heads from production wells are available for calibration. This paper evaluates two leading sources of discrepancies in using production well data, spatial and temporal structural error (S.E.). A simple Theis solution is used to evaluate the potential magnitude of spatial S.E. when calibrating a regional MODFLOW model with coarse cell resolution. Despite theoretical analyses indicating that spatial S.E. could be significant, statistical analysis of the model results suggests that temporal S.E. is dominant. Long (ranging over decades) or frequent (monthly) head datasets are key in understanding temporal S.E., to better capture water-level variability. In this study, the range in static head observations impacted estimates of the remaining time a well could extract water from the aquifer by 0.1 to 16.0 years. This uncertainty in future water supply is highly relevant to stakeholders and must be assessed in hydrographs depicting risk.