Abstract
Surface (microscale) roughness of coarse aggregates influence the cement suspension’ viscosity and the interfacial bonding strength of concrete, but its characterization method is not consolidated and still a research challenge. 3D scanner determines accurately the shape, volume, but it is incapable of describing the roughness at microscale. Roughness at microscale (surface index – cm2/cm2) can be measured accurately using interferometry, but it cannot describe shape and volume of the particles. Once the volume of aggregate particles may vary 200% and it seems crucial to establish the (micro)roughness per volume (cm2/cm3) to better understand the effects in the properties of cementitious materials. This paper presents a method of obtaining volumetric surface area of coarse aggregates at micrometric scale by joining (cm2/cm3) both techniques. Three types of aggregates were assessed: gneiss, low-grade meta-carbonate (dolomite) and quartzite (gravel), with one hundred particles in the size range of 4.75 mm to 37.5 mm. For coarse aggregates, the larger the particles, the more of their surface area will be influenced by (mesoscale) shape and less by surface (microscale) roughness. However, the smaller the particles, SI index will differ considerably. The surface area determined by the method proposed in this paper provides a good correlation with the methylene blue method.
Original language | English (US) |
---|---|
Article number | 135776 |
Journal | Construction and Building Materials |
Volume | 422 |
DOIs | |
State | Published - Apr 5 2024 |
Keywords
- 3D scanner
- Aggregates
- Interferometry
- Roughness
- volumetric surface area
ASJC Scopus subject areas
- Civil and Structural Engineering
- Building and Construction
- General Materials Science