Sputtering studies of lithiated ATJ graphite by lithium ion bombardment

K. Ibano, V. Surla, D. N. Ruzic

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Sputtering yields of Li+ on ATJ graphite at 45 degree incidence with 700 eV-2000 eV accelerations were studied. Typically, 4 × 10 13 ions/(cm2 s) flux of Li+ beam was obtained from LiCl powder in a Colutron ion source. Sputtered particles were collected by a quartz crystal microbalance to determine sputtering yields. The experiment was repeated after lithium was evaporated onto the ATJ graphite target. Suppressed amounts of sputtered particles were observed after lithium treatment. Deuterium saturation treatment for lithiated graphite was also done to simulate actual divertor conditions. The sputtering yield after deuterium saturation does not show distinct differences with non-saturated samples.

Original languageEnglish (US)
Title of host publication2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009
DOIs
StatePublished - Nov 10 2009
Externally publishedYes
Event2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009 - San Diego, CA, United States
Duration: Jun 1 2009Jun 5 2009

Publication series

NameProceedings - Symposium on Fusion Engineering

Other

Other2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009
CountryUnited States
CitySan Diego, CA
Period6/1/096/5/09

Fingerprint

Ion bombardment
Sputtering
bombardment
Graphite
Lithium
graphite
lithium
sputtering
Deuterium
deuterium
saturation
ions
Quartz crystal microbalances
Ion sources
quartz crystals
microbalances
ion sources
incidence
Fluxes
Powders

Keywords

  • Component
  • Divertor
  • Graphite
  • Lithium
  • Sputtering

ASJC Scopus subject areas

  • Nuclear and High Energy Physics
  • Nuclear Energy and Engineering

Cite this

Ibano, K., Surla, V., & Ruzic, D. N. (2009). Sputtering studies of lithiated ATJ graphite by lithium ion bombardment. In 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009 [5226432] (Proceedings - Symposium on Fusion Engineering). https://doi.org/10.1109/FUSION.2009.5226432

Sputtering studies of lithiated ATJ graphite by lithium ion bombardment. / Ibano, K.; Surla, V.; Ruzic, D. N.

2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009. 2009. 5226432 (Proceedings - Symposium on Fusion Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ibano, K, Surla, V & Ruzic, DN 2009, Sputtering studies of lithiated ATJ graphite by lithium ion bombardment. in 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009., 5226432, Proceedings - Symposium on Fusion Engineering, 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009, San Diego, CA, United States, 6/1/09. https://doi.org/10.1109/FUSION.2009.5226432
Ibano K, Surla V, Ruzic DN. Sputtering studies of lithiated ATJ graphite by lithium ion bombardment. In 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009. 2009. 5226432. (Proceedings - Symposium on Fusion Engineering). https://doi.org/10.1109/FUSION.2009.5226432
Ibano, K. ; Surla, V. ; Ruzic, D. N. / Sputtering studies of lithiated ATJ graphite by lithium ion bombardment. 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009. 2009. (Proceedings - Symposium on Fusion Engineering).
@inproceedings{933c2369c2c04472b2105fa6b816b80d,
title = "Sputtering studies of lithiated ATJ graphite by lithium ion bombardment",
abstract = "Sputtering yields of Li+ on ATJ graphite at 45 degree incidence with 700 eV-2000 eV accelerations were studied. Typically, 4 × 10 13 ions/(cm2 s) flux of Li+ beam was obtained from LiCl powder in a Colutron ion source. Sputtered particles were collected by a quartz crystal microbalance to determine sputtering yields. The experiment was repeated after lithium was evaporated onto the ATJ graphite target. Suppressed amounts of sputtered particles were observed after lithium treatment. Deuterium saturation treatment for lithiated graphite was also done to simulate actual divertor conditions. The sputtering yield after deuterium saturation does not show distinct differences with non-saturated samples.",
keywords = "Component, Divertor, Graphite, Lithium, Sputtering",
author = "K. Ibano and V. Surla and Ruzic, {D. N.}",
year = "2009",
month = "11",
day = "10",
doi = "10.1109/FUSION.2009.5226432",
language = "English (US)",
isbn = "9781424426362",
series = "Proceedings - Symposium on Fusion Engineering",
booktitle = "2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009",

}

TY - GEN

T1 - Sputtering studies of lithiated ATJ graphite by lithium ion bombardment

AU - Ibano, K.

AU - Surla, V.

AU - Ruzic, D. N.

PY - 2009/11/10

Y1 - 2009/11/10

N2 - Sputtering yields of Li+ on ATJ graphite at 45 degree incidence with 700 eV-2000 eV accelerations were studied. Typically, 4 × 10 13 ions/(cm2 s) flux of Li+ beam was obtained from LiCl powder in a Colutron ion source. Sputtered particles were collected by a quartz crystal microbalance to determine sputtering yields. The experiment was repeated after lithium was evaporated onto the ATJ graphite target. Suppressed amounts of sputtered particles were observed after lithium treatment. Deuterium saturation treatment for lithiated graphite was also done to simulate actual divertor conditions. The sputtering yield after deuterium saturation does not show distinct differences with non-saturated samples.

AB - Sputtering yields of Li+ on ATJ graphite at 45 degree incidence with 700 eV-2000 eV accelerations were studied. Typically, 4 × 10 13 ions/(cm2 s) flux of Li+ beam was obtained from LiCl powder in a Colutron ion source. Sputtered particles were collected by a quartz crystal microbalance to determine sputtering yields. The experiment was repeated after lithium was evaporated onto the ATJ graphite target. Suppressed amounts of sputtered particles were observed after lithium treatment. Deuterium saturation treatment for lithiated graphite was also done to simulate actual divertor conditions. The sputtering yield after deuterium saturation does not show distinct differences with non-saturated samples.

KW - Component

KW - Divertor

KW - Graphite

KW - Lithium

KW - Sputtering

UR - http://www.scopus.com/inward/record.url?scp=70350712565&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70350712565&partnerID=8YFLogxK

U2 - 10.1109/FUSION.2009.5226432

DO - 10.1109/FUSION.2009.5226432

M3 - Conference contribution

AN - SCOPUS:70350712565

SN - 9781424426362

T3 - Proceedings - Symposium on Fusion Engineering

BT - 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, SOFE 2009

ER -