Pre-Ionization plasma in a FRC test article

Ryan A. Pahl, Joshua L. Rovey

Research output: Contribution to conferencePaperpeer-review


Pulsed plasma systems, specifically field reversed configuration devices, show great potential for future space propulsion systems. The fundamental formation process of heavygas plasma necessary for propulsion application is not well understood. The following study is focused on characterizing the pre-ionization stage of a field reversed configuration test article. Specifically, flux loop and B-dot probe data are presented and used calculate the magnetic flux and magnetic field strengths within MPX. Finally, plasma images collected with a high speed camera are presented. Tests are conducted at 15 and 20 kV using both air and argon over a pressure range of 2 - 70 mTorr and at atmosphere. Discharges with no plasma present have a frequency of 464 kHz while a discharge that produces plasma resonates at approximately 490 kHz. Details of probe construction and calibration are also presented. A maximum magnetic field of 882 G is observed for a 20 kV discharge with fill pressure of 45 mTorr of air near the edge of the theta coil. A maximum magnetic flux of 2.17 mWb is observed for a 20 kV discharge with a fill pressure of eight mTorr. The largest amount of energy absorbed by the plasma is 30.3 J and occurs during a 20 kV discharge in air at 60 mTorr. Peak magnetic fields, magnetic flux, and formation times as functions of gas species, pressure, and voltage are also presented. Maximum energy absorption into plasma occurs at 65 mTorr of air at a discharge voltage of 20 kV.

Original languageEnglish (US)
StatePublished - 2012
Externally publishedYes
Event50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition - Nashville, TN, United States
Duration: Jan 9 2012Jan 12 2012


Other50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition
CountryUnited States
CityNashville, TN

ASJC Scopus subject areas

  • Aerospace Engineering

Fingerprint Dive into the research topics of 'Pre-Ionization plasma in a FRC test article'. Together they form a unique fingerprint.

Cite this