Natural fractures within Knox reservoirs in the Appalachian Basin: characterization and impact on poroelastic response of injection

Samin Raziperchikolaee, Oladipupo Oluwatoyin Babarinde, Joel Sminchak, Neeraj Gupta

Research output: Contribution to journalArticlepeer-review

Abstract

Understanding the distribution and orientation of natural fractures within Knox Groups is of significance in seeking potential CO2 storage zones with high practical storage capacity. Over 700 observations of natural fractures were interpreted on acquired resistivity and acoustic image logs collected at multiple well locations ranging in depth from 730 to 3900 m in the Knox Group interval on the western flank of Appalachian Basin. We evaluated the structural parameters of the fractures using statistical analysis. Natural fracture intensity was observed to increase up-dip within the studied area. The present day maximum horizontal stress direction was derived using the interpretation of wellbore breakouts and drilling-induced tensile fractures in image logs. Overall, a high percentage of fractures with varying dip directions were observed to strike subparallel to the contemporary maximum horizontal stress direction. Multiphase flow–geomechanics coupled numerical simulations and poromechanics analytical solutions were then used to study pressure and stress response of CO2 injection into the fractured Knox reservoirs. In addition, we applied a dual permeability model combined with a fracture activation model to study the permeability enhancement and its effect on injection mass increase. We also showed the line source injection solution can reasonably predict stress changes of CO2 injection into the deep saline formations. Results were analyzed to understand the potential effect of natural fractures in sandstone formations and fractured layers in thick carbonate formations on CO2-injected mass, time-dependent stress evolution, and the ratio of stress to pore pressure changes.

Original languageEnglish (US)
Pages (from-to)1247-1265
Number of pages19
JournalGreenhouse Gases: Science and Technology
Volume9
Issue number6
DOIs
StatePublished - Dec 1 2019

Keywords

  • appalachian basin
  • Barton–Bandis model
  • CO injectivity
  • CO sequestration
  • coupled fluid flow geomechanics modeling
  • fracture activation
  • geomechanics
  • injection solution
  • line source
  • maximum horizontal stress
  • natural fractures
  • poroelastic response

ASJC Scopus subject areas

  • Environmental Engineering
  • Environmental Chemistry

Fingerprint

Dive into the research topics of 'Natural fractures within Knox reservoirs in the Appalachian Basin: characterization and impact on poroelastic response of injection'. Together they form a unique fingerprint.

Cite this