TY - GEN
T1 - Mechanical, Thermal, and Chemical Design of The Mission ‘Illinois’ On-Orbit Fabricator of Composite Longerons
AU - Rasheed, Nawaf
AU - Pawlik, Adam
AU - Arretche, Ignacio
AU - Shin, Sanghun
AU - Ma, Jeffrey
AU - Otani, Ichiro
AU - Zheng, Zheyuan
AU - Wakabayashi, Sakura
AU - Ahnert, Griff
AU - Baur, Jeff
AU - Tawfick, Sameh
N1 - The authors acknowledge support from DARPA, United States as part of the NOM4D program through Award HR001122C0057. The authors would like to acknowledge the support of DARPA program manager Andrew Detor. The authors also thank the Jet Propulsion Laboratory (JPL) for their contributions to mechanical design, and technical guidance. The authors would also like to acknowledge the support of the Beckman Institute for Advanced Science and Technology and the Materials Research Lab, both located at the University of Illinois Urbana-Champaign. Chatgpt is used for grammar and typo checks, as well as suggesting fixes to grammar and readability issues during the writing of the paper.
PY - 2026
Y1 - 2026
N2 - In-space Servicing, Assembly, and Manufacturing (ISAM) will unlock new space opportunities by overcoming launch vehicle frequency and volume constraints. In particular, ISAM could enable ultra large-scale space structures, such as gigawatt scale photovoltaics. Mission ’Illinois’ is an on-orbit technology demonstration experiment designed to validate the manufacturing of a carbon fiber reinforced polymer (CFRP) composite longeron directly in space. This strategy uses the high volumetric packing during launch of carbon fiber sleeves, flattened and pre-impregnated with uncured resin. These sleeves will then be formed into hollow cylindrical structural elements and cured via incremental reactive extrusion (IRE) for CFRP manufacturing. The experiment targets in-space curing of a 2.5 mm thickness, seamless composite longeron using frontal polymerization (FP), a fast, energy-efficient curing process suited for power-limited environments. The composite prepreg is incrementally cured and translated through a compact fabricator. The fabricator integrates a kinematically constrained mandrel (KCM) that allows for the axial translation of a seamless tube while constraining an inner mandrel, and an electromechanically actuated collet that applies uniform internal pressure. This article presents the integrated mechanical, thermal, and chemical design of the Mission ’Illinois’ fabricator, including subsystem architecture, material system, and operational sequencing. Thermal analysis and experimental validation are presented. Modal analysis of the integrated payload and the critical internal mechanisms confirms compliance with launch vibration requirements.
AB - In-space Servicing, Assembly, and Manufacturing (ISAM) will unlock new space opportunities by overcoming launch vehicle frequency and volume constraints. In particular, ISAM could enable ultra large-scale space structures, such as gigawatt scale photovoltaics. Mission ’Illinois’ is an on-orbit technology demonstration experiment designed to validate the manufacturing of a carbon fiber reinforced polymer (CFRP) composite longeron directly in space. This strategy uses the high volumetric packing during launch of carbon fiber sleeves, flattened and pre-impregnated with uncured resin. These sleeves will then be formed into hollow cylindrical structural elements and cured via incremental reactive extrusion (IRE) for CFRP manufacturing. The experiment targets in-space curing of a 2.5 mm thickness, seamless composite longeron using frontal polymerization (FP), a fast, energy-efficient curing process suited for power-limited environments. The composite prepreg is incrementally cured and translated through a compact fabricator. The fabricator integrates a kinematically constrained mandrel (KCM) that allows for the axial translation of a seamless tube while constraining an inner mandrel, and an electromechanically actuated collet that applies uniform internal pressure. This article presents the integrated mechanical, thermal, and chemical design of the Mission ’Illinois’ fabricator, including subsystem architecture, material system, and operational sequencing. Thermal analysis and experimental validation are presented. Modal analysis of the integrated payload and the critical internal mechanisms confirms compliance with launch vibration requirements.
UR - https://www.scopus.com/pages/publications/105031184541
UR - https://www.scopus.com/pages/publications/105031184541#tab=citedBy
U2 - 10.2514/6.2026-0618
DO - 10.2514/6.2026-0618
M3 - Conference contribution
AN - SCOPUS:105031184541
SN - 9781624107658
T3 - AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2026
BT - AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2026
PB - American Institute of Aeronautics and Astronautics Inc, AIAA
T2 - AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2026
Y2 - 12 January 2026 through 16 January 2026
ER -