Integrated microseismic monitoring for field optimization in the marcellus shale - A case study

Carl W. Neuhaus, Sherilyn Williams-Stroud, Christine Remington, William B. Barker, Keith Blair, Garrett Neshyba, Taylor McCay

Research output: Chapter in Book/Report/Conference proceedingConference contribution


The work presented in this paper focuses on an integrative analysis of hydraulic fracture treatments conducted in the Marcellus Shale. The treatments have been monitored by a permanently installed array of buried geophones used to detect microseismic events. These event sets were analyzed in conjunction with available data from other sources, such as well logs and well cores, as well as information on reservoir properties, regional and local geology and other sub-surface structural information. Passive seismic data was acquired by an array of 101 permanently installed geophones buried and cemented in place at a depth of 150 ft in purpose-drilled boreholes covering an area of over 18 square miles providing high resolution stimulation monitoring. The permanent installation of geophones below the surface allows for significant increase in signal-to-noise ratio and consistent comparison of hydraulic fracture treatments for any given number of wells under the array footprint. This integrative analysis determined how various factors related to the specific reservoir geology in the Marcellus and to what extent the variability of hydraulic fracture treatments impacted the microseismic results. The next step of the evaluation investigated the relationship between hydrocarbon production and the microseismic results, relative to changes in geology and variability of the stimulation approach. Analysis of stress changes indicated by the microseismic source mechanisms was used to explain the asymmetry of microseismicity about the wellbore. Relationships and statistics of treatment options with respect to the monitoring results were investigated, including the modeled discrete fracture network, the modeled fracture volume, the stimulated reservoir volume, and the cumulative microseismic moment of the event set. The initial production (IP) was compared to reservoir and engineering parameters, such as treatment pressures, sequence of treatments (toe-to-heel vs. zipper-frac), net pressures, and stage spacing, to determine if the variability in the microseismic results is due to engineering differences or to spatially-varying reservoir properties. Simple well test simulations were performed to investigate different fracture and flow models, and compare results to the IP and available reservoir properties.

Original languageEnglish (US)
Title of host publicationSociety of Petroleum Engineers - SPE Hydraulic Fracturing Technology Conference 2013
Number of pages16
StatePublished - Jul 25 2013
Externally publishedYes
EventSPE Hydraulic Fracturing Technology Conference 2013 - The Woodlands, TX, United States
Duration: Feb 4 2013Feb 6 2013

Publication series

NameSociety of Petroleum Engineers - SPE Hydraulic Fracturing Technology Conference 2013


ConferenceSPE Hydraulic Fracturing Technology Conference 2013
Country/TerritoryUnited States
CityThe Woodlands, TX

ASJC Scopus subject areas

  • Geochemistry and Petrology


Dive into the research topics of 'Integrated microseismic monitoring for field optimization in the marcellus shale - A case study'. Together they form a unique fingerprint.

Cite this