Electromigration anisotropy introduced by tin orientation in solder joints

Jian Qiang Chen, Kai Lang Liu, Jing Dong Guo, Hui Cai Ma, Song Wei, Jian Ku Shang

Research output: Contribution to journalArticlepeer-review

Abstract

Single-crystal Sn/Cu solder joints with (001), (101), (301) and (100) plane of Sn as the interfaces were prepared for studying the relation between orientation of Sn and electromigration. The growth of interfacial intermetallic compounds was found to strongly depend on the Sn grain orientation. When the c-axis was parallel to the current direction, a severe polarity effect was observed, while the c-axis of Sn off the current direction, the polarity effect became less pronounced. For (101) and (301) orientation samples making a 28.6° and 58.6° angles with c-axis of Sn, asymmetrical IMCs layer growth at the anode interface, downward sloping serrated edges of Cu dissolution groove at the cathode and granular Cu6Sn5growth at the surface were observed, while these morphological features were not found in (001) and (100) samples making a 0° and 90° angles with c-axis of Sn. It is suggested that when the c-axis of β-Sn was off the current direction, the direction of Cu atoms diffusion is shifted to the c-axis of tin grain under the electromigration driving force.

Original languageEnglish (US)
Pages (from-to)264-271
Number of pages8
JournalJournal of Alloys and Compounds
Volume703
DOIs
StatePublished - 2017

Keywords

  • CuSn
  • Diffusion
  • Electromigration
  • Intermetallic compounds
  • Orientation
  • Single crystal tin

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Electromigration anisotropy introduced by tin orientation in solder joints'. Together they form a unique fingerprint.

Cite this