Cell homogenization method for pin-by-pin neutron transport calculations

Tomasz Kozlowski, Yunlin Xu, Thomas J. Downar, Deokjung Lee

Research output: Contribution to journalArticle

Abstract

For practical reactor core applications, low-order transport approximations such as SP3 have been shown to provide sufficient accuracy for both static and transient calculations with considerably less computational expense than the discrete ordinate or the full spherical harmonics methods. These methods have been applied in several core simulators where homogenization was performed at the level of the pin cell. One of the principal problems has been to recover the error introduced by pin cell homogenization. One of the basic approaches to treat pin cell homogenization error is pin cell discontinuity factors (CDFs) based on well-established generalized equivalence theory to generate appropriate group constants. The method is able to treat all sources of error together, allowing even a few-group diffusion solution with one mesh per cell to reproduce a higher-order reference solution. However, a CDF has to be derived separately for each space-angle approximation. An additional difficulty is that in practice the CDFs have to be derived from a lattice calculation from which only the scalar flux and current are available, and therefore recovery of the exact SPN angular moment is not possible. This paper focuses on the pin cell scale homogenization. It demonstrates derivation of the CDF for the SP3 transport method with finite-difference spatial discretization with the limitation of only the scalar flux and interface current being available from the heterogeneous reference. The method is demonstrated using a sample benchmark application.

Original languageEnglish (US)
Pages (from-to)1-18
Number of pages18
JournalNuclear Science and Engineering
Volume169
Issue number1
DOIs
StatePublished - Sep 2011
Externally publishedYes

Fingerprint

Homogenization method
Neutrons
Fluxes
Reactor cores
Simulators
Recovery

ASJC Scopus subject areas

  • Nuclear Energy and Engineering

Cite this

Cell homogenization method for pin-by-pin neutron transport calculations. / Kozlowski, Tomasz; Xu, Yunlin; Downar, Thomas J.; Lee, Deokjung.

In: Nuclear Science and Engineering, Vol. 169, No. 1, 09.2011, p. 1-18.

Research output: Contribution to journalArticle

Kozlowski, Tomasz ; Xu, Yunlin ; Downar, Thomas J. ; Lee, Deokjung. / Cell homogenization method for pin-by-pin neutron transport calculations. In: Nuclear Science and Engineering. 2011 ; Vol. 169, No. 1. pp. 1-18.
@article{f6aa3be453d941f08186bfa4f2663be6,
title = "Cell homogenization method for pin-by-pin neutron transport calculations",
abstract = "For practical reactor core applications, low-order transport approximations such as SP3 have been shown to provide sufficient accuracy for both static and transient calculations with considerably less computational expense than the discrete ordinate or the full spherical harmonics methods. These methods have been applied in several core simulators where homogenization was performed at the level of the pin cell. One of the principal problems has been to recover the error introduced by pin cell homogenization. One of the basic approaches to treat pin cell homogenization error is pin cell discontinuity factors (CDFs) based on well-established generalized equivalence theory to generate appropriate group constants. The method is able to treat all sources of error together, allowing even a few-group diffusion solution with one mesh per cell to reproduce a higher-order reference solution. However, a CDF has to be derived separately for each space-angle approximation. An additional difficulty is that in practice the CDFs have to be derived from a lattice calculation from which only the scalar flux and current are available, and therefore recovery of the exact SPN angular moment is not possible. This paper focuses on the pin cell scale homogenization. It demonstrates derivation of the CDF for the SP3 transport method with finite-difference spatial discretization with the limitation of only the scalar flux and interface current being available from the heterogeneous reference. The method is demonstrated using a sample benchmark application.",
author = "Tomasz Kozlowski and Yunlin Xu and Downar, {Thomas J.} and Deokjung Lee",
year = "2011",
month = "9",
doi = "10.13182/NSE08-85",
language = "English (US)",
volume = "169",
pages = "1--18",
journal = "Nuclear Science and Engineering",
issn = "0029-5639",
publisher = "American Nuclear Society",
number = "1",

}

TY - JOUR

T1 - Cell homogenization method for pin-by-pin neutron transport calculations

AU - Kozlowski, Tomasz

AU - Xu, Yunlin

AU - Downar, Thomas J.

AU - Lee, Deokjung

PY - 2011/9

Y1 - 2011/9

N2 - For practical reactor core applications, low-order transport approximations such as SP3 have been shown to provide sufficient accuracy for both static and transient calculations with considerably less computational expense than the discrete ordinate or the full spherical harmonics methods. These methods have been applied in several core simulators where homogenization was performed at the level of the pin cell. One of the principal problems has been to recover the error introduced by pin cell homogenization. One of the basic approaches to treat pin cell homogenization error is pin cell discontinuity factors (CDFs) based on well-established generalized equivalence theory to generate appropriate group constants. The method is able to treat all sources of error together, allowing even a few-group diffusion solution with one mesh per cell to reproduce a higher-order reference solution. However, a CDF has to be derived separately for each space-angle approximation. An additional difficulty is that in practice the CDFs have to be derived from a lattice calculation from which only the scalar flux and current are available, and therefore recovery of the exact SPN angular moment is not possible. This paper focuses on the pin cell scale homogenization. It demonstrates derivation of the CDF for the SP3 transport method with finite-difference spatial discretization with the limitation of only the scalar flux and interface current being available from the heterogeneous reference. The method is demonstrated using a sample benchmark application.

AB - For practical reactor core applications, low-order transport approximations such as SP3 have been shown to provide sufficient accuracy for both static and transient calculations with considerably less computational expense than the discrete ordinate or the full spherical harmonics methods. These methods have been applied in several core simulators where homogenization was performed at the level of the pin cell. One of the principal problems has been to recover the error introduced by pin cell homogenization. One of the basic approaches to treat pin cell homogenization error is pin cell discontinuity factors (CDFs) based on well-established generalized equivalence theory to generate appropriate group constants. The method is able to treat all sources of error together, allowing even a few-group diffusion solution with one mesh per cell to reproduce a higher-order reference solution. However, a CDF has to be derived separately for each space-angle approximation. An additional difficulty is that in practice the CDFs have to be derived from a lattice calculation from which only the scalar flux and current are available, and therefore recovery of the exact SPN angular moment is not possible. This paper focuses on the pin cell scale homogenization. It demonstrates derivation of the CDF for the SP3 transport method with finite-difference spatial discretization with the limitation of only the scalar flux and interface current being available from the heterogeneous reference. The method is demonstrated using a sample benchmark application.

UR - http://www.scopus.com/inward/record.url?scp=84863338329&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863338329&partnerID=8YFLogxK

U2 - 10.13182/NSE08-85

DO - 10.13182/NSE08-85

M3 - Article

AN - SCOPUS:84863338329

VL - 169

SP - 1

EP - 18

JO - Nuclear Science and Engineering

JF - Nuclear Science and Engineering

SN - 0029-5639

IS - 1

ER -