Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 1. Kinetics and Optimization

Research output: Contribution to journalArticle

Abstract

Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic oils. In the first phase of this investigation, a statistical design experiments approach identified reaction temperature and time as the most important factors influencing product oil yield. Kinetic parameters including activation energy determined for both catalytic and noncatalytic processes showed a reduction in activation energy for the catalytic reactions. In the second phase, the interactions of reaction temperature and time with a number of catalysts were investigated to determine the effect on the yield of crude plastic oil. It was found that Y-zeolites increased conversion at reduced temperature for PP and PE while spent fluid catalytic cracking and sulfated zirconia catalysts supported pyrolytic decomposition of PS and PU foams. Response surface methodology (RSM) was utilized to optimize TGA conditions for pyrolytic decomposition of PP. The results were then validated through batch scale experiments, and the resulting crude oils were characterized and distilled into motor gasoline, diesel #1, diesel #2, and vacuum gas oil fractions. Catalysts enhanced cracking at lower temperatures and narrowed the molecular weight (hydrocarbon) distribution in the crude oils. Chemical characterization of the crude oils indicated an increased gasoline-range fraction in oils obtained in the presence of catalyst while the distillate fractions were more evenly distributed among gasoline-range and diesel-range hydrocarbons in the absence of catalyst. The distillates obtained were characterized for fuel properties, elemental composition, boiling point, and molecular weight distribution. The fuel properties of the diesel-range distillate (diesel fraction) were comparable to those of ultralow sulfur diesel (ULSD).

Original languageEnglish (US)
Pages (from-to)6068-6077
Number of pages10
JournalEnergy and Fuels
Volume29
Issue number9
DOIs
StatePublished - Sep 17 2015

Fingerprint

Petroleum
Oils
Plastics
Gasoline
Catalysts
Kinetics
Crude oil
Polyethylene
Hydrocarbons
Thermogravimetric analysis
Foams
Activation energy
Decomposition
Fluid catalytic cracking
Zeolites
Temperature
Polypropylenes
Boiling point
Polystyrenes
Bottles

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology

Cite this

Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 1. Kinetics and Optimization. / Chandrasekaran, Sriraam R.; Kunwar, Bidhya; Moser, Bryan R.; Rajagopalan, Nandakishore; Sharma, Brajendra K.

In: Energy and Fuels, Vol. 29, No. 9, 17.09.2015, p. 6068-6077.

Research output: Contribution to journalArticle

@article{83e037f09e0a4444a08de1874491e99d,
title = "Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 1. Kinetics and Optimization",
abstract = "Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic oils. In the first phase of this investigation, a statistical design experiments approach identified reaction temperature and time as the most important factors influencing product oil yield. Kinetic parameters including activation energy determined for both catalytic and noncatalytic processes showed a reduction in activation energy for the catalytic reactions. In the second phase, the interactions of reaction temperature and time with a number of catalysts were investigated to determine the effect on the yield of crude plastic oil. It was found that Y-zeolites increased conversion at reduced temperature for PP and PE while spent fluid catalytic cracking and sulfated zirconia catalysts supported pyrolytic decomposition of PS and PU foams. Response surface methodology (RSM) was utilized to optimize TGA conditions for pyrolytic decomposition of PP. The results were then validated through batch scale experiments, and the resulting crude oils were characterized and distilled into motor gasoline, diesel #1, diesel #2, and vacuum gas oil fractions. Catalysts enhanced cracking at lower temperatures and narrowed the molecular weight (hydrocarbon) distribution in the crude oils. Chemical characterization of the crude oils indicated an increased gasoline-range fraction in oils obtained in the presence of catalyst while the distillate fractions were more evenly distributed among gasoline-range and diesel-range hydrocarbons in the absence of catalyst. The distillates obtained were characterized for fuel properties, elemental composition, boiling point, and molecular weight distribution. The fuel properties of the diesel-range distillate (diesel fraction) were comparable to those of ultralow sulfur diesel (ULSD).",
author = "Chandrasekaran, {Sriraam R.} and Bidhya Kunwar and Moser, {Bryan R.} and Nandakishore Rajagopalan and Sharma, {Brajendra K.}",
year = "2015",
month = "9",
day = "17",
doi = "10.1021/acs.energyfuels.5b01083",
language = "English (US)",
volume = "29",
pages = "6068--6077",
journal = "Energy & Fuels",
issn = "0887-0624",
publisher = "American Chemical Society",
number = "9",

}

TY - JOUR

T1 - Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 1. Kinetics and Optimization

AU - Chandrasekaran, Sriraam R.

AU - Kunwar, Bidhya

AU - Moser, Bryan R.

AU - Rajagopalan, Nandakishore

AU - Sharma, Brajendra K.

PY - 2015/9/17

Y1 - 2015/9/17

N2 - Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic oils. In the first phase of this investigation, a statistical design experiments approach identified reaction temperature and time as the most important factors influencing product oil yield. Kinetic parameters including activation energy determined for both catalytic and noncatalytic processes showed a reduction in activation energy for the catalytic reactions. In the second phase, the interactions of reaction temperature and time with a number of catalysts were investigated to determine the effect on the yield of crude plastic oil. It was found that Y-zeolites increased conversion at reduced temperature for PP and PE while spent fluid catalytic cracking and sulfated zirconia catalysts supported pyrolytic decomposition of PS and PU foams. Response surface methodology (RSM) was utilized to optimize TGA conditions for pyrolytic decomposition of PP. The results were then validated through batch scale experiments, and the resulting crude oils were characterized and distilled into motor gasoline, diesel #1, diesel #2, and vacuum gas oil fractions. Catalysts enhanced cracking at lower temperatures and narrowed the molecular weight (hydrocarbon) distribution in the crude oils. Chemical characterization of the crude oils indicated an increased gasoline-range fraction in oils obtained in the presence of catalyst while the distillate fractions were more evenly distributed among gasoline-range and diesel-range hydrocarbons in the absence of catalyst. The distillates obtained were characterized for fuel properties, elemental composition, boiling point, and molecular weight distribution. The fuel properties of the diesel-range distillate (diesel fraction) were comparable to those of ultralow sulfur diesel (ULSD).

AB - Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic oils. In the first phase of this investigation, a statistical design experiments approach identified reaction temperature and time as the most important factors influencing product oil yield. Kinetic parameters including activation energy determined for both catalytic and noncatalytic processes showed a reduction in activation energy for the catalytic reactions. In the second phase, the interactions of reaction temperature and time with a number of catalysts were investigated to determine the effect on the yield of crude plastic oil. It was found that Y-zeolites increased conversion at reduced temperature for PP and PE while spent fluid catalytic cracking and sulfated zirconia catalysts supported pyrolytic decomposition of PS and PU foams. Response surface methodology (RSM) was utilized to optimize TGA conditions for pyrolytic decomposition of PP. The results were then validated through batch scale experiments, and the resulting crude oils were characterized and distilled into motor gasoline, diesel #1, diesel #2, and vacuum gas oil fractions. Catalysts enhanced cracking at lower temperatures and narrowed the molecular weight (hydrocarbon) distribution in the crude oils. Chemical characterization of the crude oils indicated an increased gasoline-range fraction in oils obtained in the presence of catalyst while the distillate fractions were more evenly distributed among gasoline-range and diesel-range hydrocarbons in the absence of catalyst. The distillates obtained were characterized for fuel properties, elemental composition, boiling point, and molecular weight distribution. The fuel properties of the diesel-range distillate (diesel fraction) were comparable to those of ultralow sulfur diesel (ULSD).

UR - http://www.scopus.com/inward/record.url?scp=84941918794&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84941918794&partnerID=8YFLogxK

U2 - 10.1021/acs.energyfuels.5b01083

DO - 10.1021/acs.energyfuels.5b01083

M3 - Article

AN - SCOPUS:84941918794

VL - 29

SP - 6068

EP - 6077

JO - Energy & Fuels

JF - Energy & Fuels

SN - 0887-0624

IS - 9

ER -