TY - JOUR
T1 - An aeroelastic flutter based triboelectric nanogenerator as a self-powered active wind speed sensor in harsh environment
AU - Xu, Minyi
AU - Wang, Yi-cheng
AU - Zhang, Steven L.
AU - Ding, Wenbo
AU - Cheng, Jia
AU - He, Xu
AU - Zhang, Peng
AU - Wang, Zhengjun
AU - Pan, Xinxiang
AU - Wang, Zhong Lin
N1 - Funding Information:
This work was supported by the National Key Research and Development Program of China (Nos. 2016YFA0202704), the National Natural Science Foundation of China (Nos. 51506019, 51432005, 5151101243, 51561145021), the Fundamental Research Funds for the Central Universities, China (Nos. 3132016337, 3132016204).
Publisher Copyright:
© 2017 Elsevier Ltd
Copyright:
Copyright 2018 Elsevier B.V., All rights reserved.
PY - 2017/9/1
Y1 - 2017/9/1
N2 - With the development of internet of things and sensor networks, self-powered sensors are highly desirable. In this study, we present a simple but practical design of an aeroelastic flutter based triboelectric nanogenerator (AF-TENG) that could harvest energy from wind and serve as an active wind speed sensor. The fabricated AF-TENG consists of two copper layers and a membrane in a cuboid acrylic channel. The effect of membrane materials, including fluorinated ethylene propylene (FEP), polytetrafluoroethylene (PTFE) and Kapton (PI), length of membrane, inlet wind speed and humidity on the performance of AF-TENG have been systematically investigated. As wind flows through a designed channel, the membrane moves up and down between copper surfaces periodically, which results in a periodic electrical output signals of the AF-TENG. The corresponding frequency of the AF-TENG signal is found to increase in a robust linear relationship with the wind speed. Interestingly, as environmental humidity increases, the amplitude of voltage and current output of the AF-TENG deceases dramatically, while the frequency of the output remains the same due to high humidity can decrease the charge density on the membrane surface but have no effect on the fluttering motion of the membrane. The real-time wind speed measured through analyzing frequency of the voltage output of the AF-TENG agrees well with a commercial wind speed sensor, and the corresponding speed sensitivity is about 0.13 (m/s)/Hz or 7.7 Hz/(m/s). Therefore, the fabricated self-powered AF-TENG has shown potential applications in wireless environmental monitoring networks, even in high humidity environment.
AB - With the development of internet of things and sensor networks, self-powered sensors are highly desirable. In this study, we present a simple but practical design of an aeroelastic flutter based triboelectric nanogenerator (AF-TENG) that could harvest energy from wind and serve as an active wind speed sensor. The fabricated AF-TENG consists of two copper layers and a membrane in a cuboid acrylic channel. The effect of membrane materials, including fluorinated ethylene propylene (FEP), polytetrafluoroethylene (PTFE) and Kapton (PI), length of membrane, inlet wind speed and humidity on the performance of AF-TENG have been systematically investigated. As wind flows through a designed channel, the membrane moves up and down between copper surfaces periodically, which results in a periodic electrical output signals of the AF-TENG. The corresponding frequency of the AF-TENG signal is found to increase in a robust linear relationship with the wind speed. Interestingly, as environmental humidity increases, the amplitude of voltage and current output of the AF-TENG deceases dramatically, while the frequency of the output remains the same due to high humidity can decrease the charge density on the membrane surface but have no effect on the fluttering motion of the membrane. The real-time wind speed measured through analyzing frequency of the voltage output of the AF-TENG agrees well with a commercial wind speed sensor, and the corresponding speed sensitivity is about 0.13 (m/s)/Hz or 7.7 Hz/(m/s). Therefore, the fabricated self-powered AF-TENG has shown potential applications in wireless environmental monitoring networks, even in high humidity environment.
KW - Fluid dynamics
KW - Harsh environment
KW - Self-powered sensor
KW - Triboelectric nanogenerator
KW - Wind energy
UR - http://www.scopus.com/inward/record.url?scp=85026750269&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85026750269&partnerID=8YFLogxK
U2 - 10.1016/j.eml.2017.07.005
DO - 10.1016/j.eml.2017.07.005
M3 - Article
SN - 2352-4316
VL - 15
SP - 122
EP - 129
JO - Extreme Mechanics Letters
JF - Extreme Mechanics Letters
ER -