Find Research outputs

Search results

• Thermo-mechanical behavior measurement of polymer-bonded sugar under shock compression using in-situ time-resolved Raman spectroscopy

  Dhiman, A., Lewis, N. S., Olokun, A., Dlott, D. D. & Tomar, V., Dec 2022, In: Scientific reports. 12, 1, 1876.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Thermomechanical behavior of 55Ni45Ti nitinol

  Ford, D. S. & White, S. R., Jun 1996, In: Acta Materialia. 44, 6, p. 2295-2307 13 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical behavior of a wide slab-casting mold

  Hamilton, G. J., Hibbeler, L. C. & Thomas, B. G., 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, p. 2593-2605 13 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermomechanical Characterization of Hot Surface Ignition Device Using Phenomenological Heat Flux Model

  Kang, S. G., Ryu, J. I., Motily, A. H., Numkiatsakul, P., Lee, T., Kriven, W. M., Kim, K. S. & Kweon, C. B. M., 2022, In: Journal of Propulsion and Power. 38, 4, p. 656-670 15 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical characterization of materials at micro/nanoscal E under bending

  Elhebeary, M. & Saif, M. T. A., Feb 23 2017, 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems, MEMS 2017. Institute of Electrical and Electronics Engineers Inc., p. 736-739 4 p. 7863513. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermomechanical characterization of NiTiNb shape memory alloy for concrete active confinement applications

  Dommer, K. & Andrawes, B., Oct 2012, In: Journal of Materials in Civil Engineering. 24, 10, p. 1274-1282 9 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical coupling of a hyper-viscoelastic truck tire and a pavement layer and its impact on three-dimensional contact stresses

  Jayme, A. & Al-Qadi, I. L., 2021, Transportation Research Record. 11 ed. SAGE Publishing, p. 359-372 14 p. (Transportation Research Record; vol. 2675, no. 11).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Thermomechanical cyclic deformation of metal-matrix composites

  Karayaka, M. & Sehitoglu, H., 1992, In: ASTM Special Technical Publication. 1157, p. 101-120 20 p.

  Research output: Contribution to journal › Conference article › peer-review

• Thermomechanical deformation modeling of Al2xxxT4/SiC_p composites

  Karayaka, M. & Sehitoglu, H., Jan 1993, In: Acta Metallurgica Et Materialia. 41, 1, p. 175-189 15 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical deformation of A1319 - T7B with small secondary dendrite arm spacing

  Sehitoglu, H., Smith, T. J. & Maier, H. J., 2000, ASTM Special Technical Publication. 1371 ed. ASTM, p. 53-68 16 p. (ASTM Special Technical Publication; no. 1371).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermomechanical fatigue, oxidation, and creep: Part i. Damage mechanisms

  Neu, R. W. & Sehitoglu, H., Sep 1989, In: Metallurgical Transactions A. 20, 9, p. 1755-1767 13 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical fatigue, oxidation, and Creep: Part II. Life prediction

  Neu, R. W. & Sehitoglu, H., Sep 1989, In: Metallurgical Transactions A. 20, 9, p. 1769-1783 15 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical fatigue analysis of cast aluminum engine components

  Su, X., Zubeck, M., Lasecki, J., Sehitoglu, H., Engler-Pinto, C. C., Tang, C. Y. & Allison, J. E., 2003, In: ASTM Special Technical Publication. 1428, p. 240-251 12 p.

  Research output: Contribution to journal › Conference article › peer-review

• Thermo-mechanical fatigue behavior of cast 319 aluminum alloys

  Engler-Pinto, C. C., Sehitoglu, H., Maier, H. J. & Foglesong, T. J., 2002, In: European Structural Integrity Society. 29, C, p. 3-13 11 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical fatigue life prediction methods

  Sehitoglu, H., 1992, ASTM Special Technical Publication. 1122 ed. Publ by ASTM, p. 47-76 30 p. (ASTM Special Technical Publication; no. 1122).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermo-mechanical fatigue of mar-M247: Part 1-Experiments

  Boismier, D. A. & Sehitogiu, H., Jan 1990, In: Journal of Engineering Materials and Technology, Transactions of the ASME. 112, 1, p. 68-79 12 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical fatigue of mar-M247: Part 2-Life prediction

  Sehitoglu, H. & Boismier, D. A., Jan 1990, In: Journal of Engineering Materials and Technology, Transactions of the ASME. 112, 1, p. 80-89 10 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical fatigue of particulate-reinforced aluminum 2xxx-T4

  Karayaka, M. & Sehitoglu, H., Mar 1991, In: Metallurgical Transactions A. 22, 3, p. 697-707 11 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical feedbacks in magmatic systems: Implications for growth, longevity, and evolution of large caldera-forming magma reservoirs and their supereruptions

  de Silva, S. L. & Gregg, P. M., Aug 1 2014, In: Journal of Volcanology and Geothermal Research. 282, p. 77-91 15 p.

  Research output: Contribution to journal › Review article › peer-review

• Thermomechanical finite-element model of shell behavior in continuous casting of steel

  Li, C. & Thomas, B. G., Dec 2004, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 35, 6, p. 1151-1172 22 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical finite element model of shell behavior in continuous casting of steel

  Li, C. & Thomas, B. G., Nov 3 2003, Modeling of Casting, Welding and Advanced Solidification Processes. Stefanescu, DM., Warren, J. A., Jolly, M. R., Krane, M. J. M., Stefanescu, D. M., Warren, J. A., Jolly, M. R. & Krane, M. J. M. (eds.). p. 385-392 8 p. (Modeling of Casting, Welding and Advanced Solidification Processes).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermo-mechanical finite element model of shell behavior in the continuous casting of steel

  Li, C. & Thomas, B. G., 2002, In: Key Engineering Materials. 233-236, II, p. 827-834 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Thermomechanical formation and recovery of nanoindents in a shape memory polymer studied using a heated tip

  Yang, F., Wornyo, E., Gall, K. & King, W. P., Mar 2008, In: Scanning. 30, 2, p. 197-202 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Thermomechanical formation and thermal sensing of nanometer-scale indentations in PMMA thin films for parallel and dense AFM data storage

  Cross, G. L. W., Despont, M., Drechsler, U., Dürig, U. T., Rothuizen, H., Binnig, G. K., Vettiger, P., King, W. P. & Goodson, K. E., 2001, In: Materials Research Society Symposium-Proceedings. 649, p. Q2.3.1-Q2.3.6

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical formation and thermal sensing of nanometer-scale indentations in PMMA thin films for parallel and dense AFM data storage

  Cross, G. L. W., Despont, M., Drechsler, U., Dürig, U. T., Rothuizen, H., Binnig, G. K., Vettiger, P., King, W. P. & Goodson, K. E., 2001, In: Materials Research Society Symposium - Proceedings. 649, p. Q2.3.1-Q2.3.6

  Research output: Contribution to journal › Conference article › peer-review

• Thermomechanical formation of nanoscale polymer indents with a heated silicon tip

  King, W. P. & Goodson, K. E., Nov 2007, In: Journal of Heat Transfer. 129, 11, p. 1600-1604 5 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures

  Khan, A. S., Lopez-Pamies, O. & Kazmi, R., Apr 2006, In: International journal of plasticity. 22, 4, p. 581-601 21 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical Modeling of Beam Blank Casting

  Hibbeler, L. C., Xu, K., Thomas, B. G., Koric, S. & Spangler, C., Jul 2009, In: Iron and Steel Technology. 6, 7, p. 60-73 14 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical modeling of laser-driven non-contact transfer printing: Two-dimensional analysis

  Li, R., Li, Y., Lü, C., Song, J., Saeidpouraza, R., Fang, B., Zhong, Y., Ferreira, P. M., Rogers, J. A. & Huang, Y., Jul 21 2012, In: Soft Matter. 8, 27, p. 7122-7127 6 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical modeling of regressing heterogeneous solid propellants

  Srinivasan, K. R., Matouš, K., Geubelle, P. H. & Jackson, T. L., Nov 20 2009, In: Journal of Computational Physics. 228, 21, p. 7883-7901 19 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical modeling of scanning joule expansion microscopy imaging of single-walled carbon nanotube devices

  Song, J., Lu, C., Xie, X., Li, Y., Zhang, Y., Grosse, K. L., Dunham, S., Huang, Y., King, W. P. & Rogers, J. A., Jul 2013, In: Journal of Applied Mechanics, Transactions ASME. 80, 4, 040907.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical model of solidification processes: implementation in Abaqus and application to continuous casting casting of steel

  Koric, S. & Thomas, B., 2009, Saarbrücken: VDM Verlag. 160 p.

  Research output: Book/Report/Conference proceeding › Book

• Thermo-mechanical model of solidification processes with ABAQUS

  Koric, S. & Thomas, B. G., 2007. 15 p.

  Research output: Contribution to conference › Paper › peer-review

• Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws

  Koric, S. & Thomas, B. G., Feb 1 2008, In: Journal of Materials Processing Technology. 197, 1-3, p. 408-418 11 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical performance and fatigue cycling of novel bismaleimide-based shape memory polymer resin and composites

  Tandon, G. P., Gibson, T., Coomer, R. & Baur, J., 2013, p. 1244-1251. 8 p.

  Research output: Contribution to conference › Paper › peer-review

• Thermo-mechanical properties of nano-scale freestanding aluminum films

  Haque, M. A. & Saif, M. T. A., Jul 22 2005, In: Thin Solid Films. 484, 1-2, p. 364-368 5 p.

  Research output: Contribution to journal › Article › peer-review

• Thermo-mechanical properties of thermoset polymers and composites fabricated by frontal polymerization

  Yourdkhani, M., Koohbor, B., Lamuta, C., Dean, L. M., Centellas, P., Ivanoff, D. G., Robertson, I. D., White, S. R. & Sottos, N. R., 2019, Conference Proceedings of the Society for Experimental Mechanics Series. Springer, p. 89-91 3 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Thermo-Mechanical Response of a Hot Surface Ignition Device under Aircraft Compression Ignition Engine Conditions

  Kang, S. G., Ryu, J. I., Motily, A. H., Numkiatsakul, P., Lee, T., Kriven, W. M., Kim, K. S. & Kweon, C. B. M., 2021, AIAA Propulsion and Energy Forum, 2021. American Institute of Aeronautics and Astronautics Inc, AIAA, AIAA 2021-3615. (AIAA Propulsion and Energy Forum, 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermomechanical response of SMA composite beams with embedded nitinol wires in an epoxy matrix

  White, S. R. & Herman, J. B., 1998, In: Journal of Intelligent Material Systems and Structures. 9, 5, p. 391-400 10 p.

  Research output: Contribution to journal › Conference article › peer-review

• Thermomechanical sensitivity of microcantilevers in the mid-infrared spectral region

  Kwon, B., Wang, C., Park, K., Bhargava, R. & King, W. P., Jan 2011, In: Nanoscale and Microscale Thermophysical Engineering. 15, 1, p. 16-27 12 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical testing of FeNiCoTi shape memory alloy for active confinement of concrete

  Chen, Q., Andrawes, B. O. & Sehitoglu, H., May 2014, In: Smart Materials and Structures. 23, 5, 055015.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanical topology optimization of shape-memory alloy structures using a transient bilevel adjoint method

  Kang, Z. & James, K. A., Jun 15 2020, In: International Journal for Numerical Methods in Engineering. 121, 11, p. 2558-2580 23 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanics of shallow magma chamber pressurization: Implications for the assessment of ground deformation data at active volcanoes

  Gregg, P. M., de Silva, S. L. & Grosfils, E. B., Dec 15 2013, In: Earth and Planetary Science Letters. 384, p. 100-108 9 p.

  Research output: Contribution to journal › Article › peer-review

• Thermomechanics of swelling biopolymeric systems

  Singh, P. P., Cushman, J. N., Bennethum, L. S. & Maier, D. E., Oct 2003, In: Transport in Porous Media. 53, 1, p. 1-24 24 p.

  Research output: Contribution to journal › Article › peer-review

• Thermometry and thermal transport in micro/nanoscale solid-state devices and structures

  Cahill, D. G., Goodson, K. & Majumdar, A., Apr 2002, In: Journal of Heat Transfer. 124, 2, p. 223-241 19 p.

  Research output: Contribution to journal › Article › peer-review

• Thermometry of plasmonic nanostructures by anti-S tokes electronic Raman scattering

  Xie, X. & Cahill, D. G., Oct 31 2016, In: Applied Physics Letters. 109, 18, 183104.

  Research output: Contribution to journal › Article › peer-review

• Thermometry with spin-dependent lattices

  McKay, D. & Demarco, B., May 28 2010, In: New Journal of Physics. 12, 055013.

  Research output: Contribution to journal › Article › peer-review

• Thermo-optic coefficient of B₂O₃ and GeO₂ co-doped silica fibers

  Pan, G., Yu, N., Meehan, B., Hawkins, T. W., Ballato, J. & Dragic, P. D., Jul 2020, In: Optical Materials Express. 10, 7, p. 1509-1521 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Thermophilic cytochrome P450 (CYP119) from Sulfolobus solfataricus: High resolution structure and functional properties

  Park, S. Y., Yamane, K., Adachi, S. I., Shiro, Y., Weiss, K. E., Maves, S. A. & Sligar, S. G., Sep 20 2002, In: Journal of Inorganic Biochemistry. 91, 4, p. 491-501 11 p.

  Research output: Contribution to journal › Article › peer-review

• Thermophilic degradation of hemicellulose, a critical feedstock in the production of bioenergy and other value-added products

  Cann, I., Pereira, G. V., Abdel-Hamid, M. M., Kim, H., Wefers, D., Kayang, B. B., Kanai, T., Sato, T., Bernardi, R. C., Atomi, H. & Mackie, R. I., Mar 1 2020, In: Applied and environmental microbiology. 86, 7, 2296.

  Research output: Contribution to journal › Article › peer-review