Find Research outputs

Search results

• 2011

  Augmented boost converter for near null-load transient response

  Kumar, O., Shenoy, P. S., Krein, P. T. & Kapat, S., Dec 1 2011, 2011 IEEE Power and Energy Conference at Illinois, PECI 2011. 5740478. (2011 IEEE Power and Energy Conference at Illinois, PECI 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Transient analysis
  • Electric potential

• Beyond time-optimality: Energy-based control of augmented buck converters for near ideal load transient response

  Shenoy, P. S., Krein, P. T. & Kapat, S., 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 916-922 7 p. 5744704

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Transient analysis
  • Bandwidth
  • Electric potential

• Bus selection in multibus DC microgrids

  Balog, R. S. & Krein, P. T., May 30 2011, In: IEEE Transactions on Power Electronics. 26, 3, p. 860-867 8 p., 5643159.

  Research output: Contribution to journal › Article › peer-review

  • Diodes
  • Electric potential
  • Redundancy
  • Acoustic impedance
  • Controllers

• Circuit-based induction motor drive reliability under different control schemes and safe-mode operation

  Bazzi, A. M., Ding, X., Dominguez-Garcia, A. & Krein, P. T., May 13 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 653-660 8 p. 5744665. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Induction motors
  • Vector control (Electric machinery)
  • Feedback linearization
  • Torque control
  • Networks (circuits)

• Concerning maximum power point tracking for photovoltaic optimization using ripple-based extremum seeking control

  Bazzi, A. M. & Krein, P. T., Aug 3 2011, In: IEEE Transactions on Power Electronics. 26, 6, p. 1611-1612 2 p., 5959287.

  Research output: Contribution to journal › Article › peer-review

  • Power electronics

• Constrained online efficiency optimization to guarantee load support in motor drives

  Bazzi, A. M. & Krein, P. T., Sep 14 2011, 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011. p. 1149-1152 4 p. 5994764. (2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fluxes
  • Hybrid vehicles
  • Braking
  • Dynamic loads
  • Electric vehicles

• Control for high instantaneous torque from induction machines: Methods and limits

  Buyukdegirmenci, V. T. & Krein, P. T., Sep 14 2011, 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011. p. 777-782 6 p. 5994910. (2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Torque
  • Vector control (Electric machinery)
  • Magnetic circuits
  • Controllers
  • Electric potential

• Cost benefits and vehicle-to-grid regulation services of unidirectional charging of electric vehicles

  Fasugba, M. A. & Krein, P. T., Nov 28 2011, IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings. p. 827-834 8 p. 6063856. (IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Vehicle-to-grid
  • Electric vehicles
  • Scheduling
  • Plug-in hybrid vehicles
  • Costs

• Direct torque control stability conditions and compensation methods

  Buyukdegirmenci, V. T. & Krein, P. T., Sep 14 2011, 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011. p. 107-112 6 p. 5994751. (2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Torque control
  • Compensation and Redress
  • Torque
  • Controllers
  • Electric potential

• Electric machines as metamaterials: Induction machine design using planar layer models

  Magill, M. P. & Krein, P. T., 2011, 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011. p. 890-895 6 p. 5994932

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric machinery
  • Machine design
  • Metamaterials
  • Large scale systems
  • Rotors

• Fault impacts on solar power unit reliability

  Bazzi, A. M., Kim, K. A., Johnson, B. B., Krein, P. T. & Dominguez-Garcia, A., May 13 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 1223-1231 9 p. 5744749. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solar energy
  • Power converters
  • Power electronics
  • Environmental impact
  • Physics

• Gaining vehicle-to-grid benefits with unidirectional electric and plug-in hybrid vehicle chargers

  Fasugba, M. A. & Krein, P. T., Nov 7 2011, 2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011. 6043207. (2011 IEEE Vehicle Power and Propulsion Conference, VPPC 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Vehicle-to-grid
  • Plug-in hybrid vehicles
  • Reactive power
  • Electric vehicles
  • Scheduling

• Interface analysis of Ti/Al/Ti/Au ohmic contacts with regrown n ⁺ -GaN layers using molecular beam epitaxy

  Seo, H. C., Sivaramakrishnan, S., Zuo, J-M., Pang, L., Krein, P. T. & Kim, K., Dec 1 2011, In: Surface and Interface Analysis. 43, 13, p. 1627-1631 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Molecular beam epitaxy
  • Ohmic contacts
  • electric contacts
  • Metals
  • molecular beam epitaxy

• Introduction

  Krein, P. T., Jan 1 2011, Power Electronics Handbook. Elsevier Inc., p. 1-14 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Power electronics
  • Networks (circuits)
  • Switches
  • Semiconductor materials
  • Energy dissipation

• Irradiance and temperature transient sensitivity analysis for photovoltaic control

  Kim, K. A., Krein, P. T., Lee, J. J., Bae, H. & Cho, B. H., Aug 31 2011, 8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia. p. 393-400 8 p. 5944556. (8th International Conference on Power Electronics - ECCE Asia: "Green World with Power Electronics", ICPE 2011-ECCE Asia).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sensitivity analysis
  • Temperature
  • Electric potential
  • Controllers

• Photovoltaic AC module composed of a very large number of interleaved inverters

  Johnson, B., Krein, P. T. & Chapman, P., May 13 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 976-981 6 p. 5744713. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solar cells
  • Level control
  • Switching frequency
  • Pulse width modulation
  • Energy storage

• Power delivery for series connected voltage domains in digital circuits

  Shenoy, P. S., Fedorov, I., Neyens, T. & Krein, P. T., 2011, 2011 International Conference on Energy Aware Computing, ICEAC 2011. 6136698

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Digital circuits
  • Electric potential
  • Voltage regulators
  • Voltage control
  • Microprocessor chips

• Small inverter-interfaced distributed energy resources for reactive power support

  Domínguez-García, A. D., Hadjicostis, C. N., Krein, P. T. & Cady, S. T., May 13 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 1616-1621 6 p. 5744811. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Energy resources
  • Reactive power

• Solid-state light simulator with current-mode control

  Bazzi, A. M., Klein, Z., Sweeney, M., Kroeger, K., Shenoy, P. & Krein, P. T., May 13 2011, 2011 26th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2011. p. 2047-2053 7 p. 5744878. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Light emitting diodes
  • Simulators
  • Color
  • Light sources
  • Solar cells

• System energy minimization via joint optimization of the DC-DC converter and the core

  Abdallah, R. A., Shenoy, P. S., Shanbhag, N. R. & Krein, P. T., Sep 19 2011, IEEE/ACM International Symposium on Low Power Electronics and Design, ISLPED 2011. p. 97-102 6 p. 5993614. (Proceedings of the International Symposium on Low Power Electronics and Design).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • DC-DC converters
  • Electric potential
  • Energy utilization
  • Throughput
  • Voltage scaling
• 2013

  A dual-primal finite-element tearing and interconnecting method combined with tree-cotree splitting for modeling electromechanical devices

  Yao, W., Jin, J. & Krein, P. T., Mar 1 2013, In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields. 26, 2, p. 151-163 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Electromechanical devices
  • Combined Method
  • Primal-dual
  • Finite Element
  • Modeling

• A dynamic photovoltaic model incorporating capacitive and reverse-bias characteristics

  Kim, K. A., Xu, C., Jin, L. & Krein, P. T., Aug 28 2013, In: IEEE Journal of Photovoltaics. 3, 4, p. 1334-1341 8 p., 6584777.

  Research output: Contribution to journal › Article › peer-review

  • Photovoltaic cells
  • photovoltaic cells
  • dynamic characteristics
  • strings
  • cells

• A fast and flexible analytical approach for thermal modeling of a linear stator structure

  Buyukdegirmenci, V. T., Nategh, S., Magill, M. P. & Krein, P. T., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 793-800 8 p. 6556184. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Stators
  • Hot Temperature
  • Laplace equation
  • Poisson equation
  • Finite element method

• An average modeling approach for mobile refrigeration hybrid power systems with improved battery simulation

  Cao, Y. & Krein, P. T., Sep 16 2013, 2013 IEEE Transportation Electrification Conference and Expo: Components, Systems, and Power Electronics - From Technology to Business and Public Policy, ITEC 2013. 6574501. (2013 IEEE Transportation Electrification Conference and Expo: Components, Systems, and Power Electronics - From Technology to Business and Public Policy, ITEC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Refrigeration
  • Hot Temperature
  • Power and Energy
  • Cost effectiveness
  • Electric power systems

• An efficient domain decomposition method for 3-D finite element analysis of nonlinear electric machine problems

  Yao, W., Jin, J. M. & Krein, P. T., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 709-715 7 p. 6556171. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Domain decomposition methods
  • Electric machinery
  • Newton-Raphson method
  • Finite element method
  • Nonlinear analysis

• An overview of loss minimization methods in machines

  Bazzi, A. M. & Krein, P. T., 2013, Electrical Manufacturing and Coil Winding Expo 2010-2013. p. 13-18 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Permanent magnets
  • Physics
  • Energy conservation

• Application of the LU recombination method to the FETI-DP method for solving low-frequency multiscale electromagnetic problems

  Yao, W., Jin, J. & Krein, P. T., Oct 4 2013, In: IEEE Transactions on Magnetics. 49, 10, p. 5346-5355 10 p., 6517909.

  Research output: Contribution to journal › Article › peer-review

  • Domain decomposition methods
  • Reluctance motors
  • Eddy currents
  • Linear systems
  • Drilling

• Average and detailed modeling approaches emphasizing subsystems in a hybrid mobile refrigeration

  Cao, Y. & Krein, P. T., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 1132-1136 5 p. 6556301. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Refrigeration
  • Electric machinery
  • Electric drives
  • Electric power systems
  • Hot Temperature

• Coupled-inductor filter: A basic filter building block

  Balog, R. S. & Krein, P. T., Jan 1 2013, In: IEEE Transactions on Power Electronics. 28, 1, p. 537-546 10 p., 6145773.

  Research output: Contribution to journal › Article › peer-review

  • Networks (circuits)
  • Topology
  • Electric inductors
  • Power converters
  • Switching frequency

• Design considerations for a complete drive system

  Magill, M. P., Buyukdegirmenci, V. T. & Krein, P. T., Dec 1 2013, Electrical Manufacturing and Coil Winding Expo 2010-2013. p. 57-61 5 p. (Electrical Manufacturing and Coil Winding Expo 2010-2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric motors
  • Power electronics
  • Systems analysis

• Development of closed-form solutions for fast thermal modeling of rotating electric machinery

  Buyukdegirmenci, V. T., Magill, M. P., Nategh, S. & Krein, P. T., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 832-838 7 p. 6556189. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric machinery
  • Rotating machinery
  • Hot Temperature
  • Stators
  • Temperature distribution

• Differential power processing for DC systems

  Shenoy, P. S. & Krein, P. T., Apr 2013, In: IEEE Transactions on Power Electronics. 28, 4, p. 1795-1806 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Electric potential
  • Voltage regulators
  • Digital circuits
  • Conversion efficiency
  • Energy conversion

• Differential power processing for increased energy production and reliability of photovoltaic systems

  Shenoy, P. S., Kim, K. A., Johnson, B. B. & Krein, P. T., Nov 14 2013, In: IEEE Transactions on Power Electronics. 28, 6, p. 2968-2979 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Conversion efficiency
  • Energy conversion
  • Reliability analysis
  • Monitoring

• Hot spotting and second breakdown effects on reverse I-V characteristics for mono-crystalline Si Photovoltaics

  Kim, K. A. & Krein, P. T., Dec 31 2013, 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013. p. 1007-1014 8 p. 6646813. (2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Crystalline materials
  • Hot Temperature
  • Heating
  • Degradation
  • Temperature

• Machine characterization for short-term or instantaneous torque capabilities: An approach based on transient thermal response

  Buyukdegirmenci, V. T. & Krein, P. T., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 801-808 8 p. 6556185. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Characterization (materials science)
  • Torque
  • Hot Temperature
  • Electric machinery
  • Temperature

• Peak duty electric machines: Design, operation and failure modes

  Buyukdegirmenci, V. T. & Krein, P. T., Dec 1 2013, Electrical Manufacturing and Coil Winding Expo 2010-2013. p. 140-146 7 p. (Electrical Manufacturing and Coil Winding Expo 2010-2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric machinery
  • Machine design
  • Thermal cycling
  • Failure modes
  • Hybrid vehicles

• Performance and efficiency enhancement of induction machine drives: Duality-based approach to VSI and CSI control

  Sridharan, S. & Krein, P. T., 2013, 2013 IEEE 14th Workshop on Control and Modeling for Power Electronics, COMPEL 2013. 6626459. (2013 IEEE 14th Workshop on Control and Modeling for Power Electronics, COMPEL 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electric potential
  • Pulse width modulation
  • Harmonic distortion
  • Vector spaces
  • Induction motors

• Photovoltaic AC parameter characterization for dynamic partial shading and hot spot detection

  Kim, K. A., Krein, P. T., Seo, G. S. & Cho, B. H., Jul 1 2013, 2013 28th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2013. p. 109-115 7 p. 6520194. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Photovoltaic cells
  • Capacitance
  • Maximum power point trackers
  • Bias voltage
  • Power converters

• Photovoltaic hot spot analysis for cells with various reverse-bias characteristics through electrical and thermal simulation

  Kim, K. A. & Krein, P. T., 2013, 2013 IEEE 14th Workshop on Control and Modeling for Power Electronics, COMPEL 2013. 6626399

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Photovoltaic cells
  • Heating
  • Hot Temperature
  • Diodes
  • Degradation

• Pre-energized compact auxiliary circuit to buffer loads from fast transients with the goal of managing load-informed power

  Shan, Z., Krein, P. T., Tse, C. K. & Tan, S. C., Dec 9 2013, 2013 IEEE 14th Workshop on Control and Modeling for Power Electronics, COMPEL 2013. 6626433. (2013 IEEE 14th Workshop on Control and Modeling for Power Electronics, COMPEL 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Networks (circuits)

• Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles

  Yilmaz, M. & Krein, P. T., Jan 1 2013, In: IEEE Transactions on Power Electronics. 28, 5, p. 2151-2169 19 p., 6280677.

  Research output: Contribution to journal › Review article › peer-review

  • Plug-in electric vehicles
  • Plug-in hybrid vehicles
  • Charging (batteries)
  • Topology
  • Electric drives

• Review of the impact of vehicle-to-grid technologies on distribution systems and utility interfaces

  Yilmaz, M. & Krein, P. T., Jun 24 2013, In: IEEE Transactions on Power Electronics. 28, 12, p. 5673-5689 17 p., 6353961.

  Research output: Contribution to journal › Review article › peer-review

  • Vehicle-to-grid
  • Energy resources
  • Communication
  • Standardization
  • Reactive power

• System-level power loss sensitivity to various control variables in vector-controlled induction motor drives

  Bazzi, A. M., Buyukdegirmenci, V. T. & Krein, P. T., May 23 2013, In: IEEE Transactions on Industry Applications. 49, 3, p. 1367-1373 7 p., 6478795.

  Research output: Contribution to journal › Article › peer-review

  • Induction motors
  • Fluxes
  • Saturation magnetization
  • Vector control (Electric machinery)
  • Torque control

• The chimera of rare earth materials: Enhancing alternatives for machines and drives and managing the beast

  Habetler, T. G., Harley, R. G., Rhett Mayor, J., Krein, P. T., Pekarek, S. & Sudhoff, S., Aug 22 2013, Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013. p. 1509-1550 42 p. 6556341. (Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Winding machines
  • Rare earths
  • Machine design
  • Thermal effects
  • Physics

• Utilization of median filters in power electronics: Traction drive applications

  Bazzi, A. M. & Krein, P. T., Jul 1 2013, 2013 28th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2013. p. 3055-3060 6 p. 6520735. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Median filters
  • Power electronics
  • Traction motors
  • Induction motors
  • Data acquisition
• 2014

  A 0.79 pJ/K-Gate, 83% efficient unified core and voltage regulator architecture for sub/near-threshold operation in 130 nm CMOS

  Zhang, S., Tu, J. S., Shanbhag, N. R. & Krein, P. T., Nov 1 2014, In: IEEE Journal of Solid-State Circuits. 49, 11, p. 2644-2657 14 p., 6901296.

  Research output: Contribution to journal › Article › peer-review

  • Voltage regulators
  • Capacitors
  • Energy efficiency
  • Electron energy levels
  • FIR filters

• A finite-element-based domain decomposition method for efficient simulation of nonlinear electromechanical problems

  Yao, W., Jin, J., Krein, P. T. & Magill, M. P., Jun 2014, In: IEEE Transactions on Energy Conversion. 29, 2, p. 309-319 11 p., 6774426.

  Research output: Contribution to journal › Article › peer-review

  • Domain decomposition methods
  • Newton-Raphson method
  • Finite element method
  • Nonlinear analysis
  • Magnets

• Electrified vehicles and the smart grid: The ITS perspective

  Cheng, X., Hu, X., Yang, L., Husain, I., Inoue, K., Krein, P., Lefevre, R., Li, Y., Nishi, H., Taiber, J. G., Wang, F. Y., Zha, Y., Gao, W. & Li, Z., Aug 2014, In: IEEE Transactions on Intelligent Transportation Systems. 15, 4, p. 1388-1404 17 p., 6869118.

  Research output: Contribution to journal › Review article › peer-review

  • Electric vehicles
  • Economics
  • Communication

• Evaluation of induction and permanent-magnet synchronous machines using drive-cycle energy and loss minimization in traction applications

  Buyukdegirmenci, V. T., Bazzi, A. M. & Krein, P. T., Jan 1 2014, In: IEEE Transactions on Industry Applications. 50, 1, p. 395-403 9 p., 6524023.

  Research output: Contribution to journal › Article › peer-review

  • Permanent magnets
  • Hybrid vehicles
  • Fluxes
  • Simulators
  • Energy utilization

• High-current AlGaN/GaN high electron mobility transistors achieved by selective-area growth via plasma-assisted molecular beam epitaxy

  Pang, L., Krein, P. T., Kim, K. W., Lee, J. H. & Kim, K., Jan 1 2014, In: Physica Status Solidi (A) Applications and Materials Science. 211, 1, p. 180-183 4 p.

  Research output: Contribution to journal › Article › peer-review

  • aluminum gallium nitride
  • Molecular beam epitaxy
  • High electron mobility transistors
  • high electron mobility transistors
  • Plasmas