If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Modeling of material removal in atomized dielectric-based electrical discharge machining (EDM)

Tanveer, A., Kapoor, S. G. & Mujumdar, S. S., Jan 1 2019, Processes; Materials. American Society of Mechanical Engineers (ASME), (ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Machine-Tool error observer design with application to thermal error tracking

Ko, H. W., Kapoor, S. G., Ferreira, P. M., Bazzoli, P., Adam Nisbett, J., Bristow, D. & Chen, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Virtually-guided certification with uncertainty quantification applied to die casting

Shahane, S., Mujumdar, S., Kim, N., Priya, P., Aluru, N., Ferreira, P., Kapoor, S. G. & Vanka, S., Jan 1 2018, ASME 2018 Verification and Validation Symposium, VVS 2018. American Society of Mechanical Engineers (ASME), (ASME 2018 Verification and Validation Symposium, VVS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A thermal model to predict tool temperature in machining of TI-6AL-4V alloy with an atomization-based cutting fluid spray system

Tanveer, A., Marla, D. & Kapoor, S. G., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Atomized dielectric spray-based electric discharge machining (Spray-EDM) for sustainable manufacturing

Pattabhiraman, A., Marla, D. & Kapoor, S. G., Jan 1 2015, Processing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

An enhanced microstructure-level finite element machining model for carbon nanotube (CNT)-polymer composites

Jiang, L., Nath, C., Samuel, J. & Kapoor, S. G., Jan 1 2014, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), V002T02A034. (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling of melt-pool formation and material removal in micro electro-discharge machining

Mujumdar, S. S., Curreli, D., Kapoor, S. G. & Ruzic, D. N., Jan 1 2014, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Characterization of fluid film produced by an atomization-based cutting fluid (ACF) spray system during machining

Hoyne, A. C., Nath, C. & Kapoor, S. G., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1187. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cutting temperature measurement during titanium machining with an atomization-based cutting fluid (ACF) spray system

Hoyne, A. C., Nath, C. & Kapoor, S. G., Jan 1 2013, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of fluid concentration in titanium machining with an Atomization-based Cutting Fluid (ACF) spray system

Nath, C., Kapoor, S. G., Srivastava, A. K. & Iverson, J., Dec 1 2013, 41st North American Manufacturing Research Conference 2013 - Transactions of the North American Manufacturing Research Institution of SME, NAMRC 2013. p. 650-656 7 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 41).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of inter-particle interaction on particle deposition in a cross-flow microfilter

Jubery, T. Z., Kapoor, S. G. & Wentz, J. E., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1211. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Nath, C., Kapoor, S. G., DeVor, R. E. & Srivastava, A. K., Nov 28 2012, 40th North American Manufacturing Research Conference 2012 - Transactions of the North American Manufacturing Research Institution of SME. p. 315-323 9 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Droplet spray behavior of an atomization-based cutting fluid (ACF) system for machining of titanium alloys

Nath, C., Kapoor, S. G., Srivastava, A. K. & Iverson, J., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. p. 2023-2033 11 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Estimating the cohesive zone model parameters for carbon nanotube-polymer interface using inverse finite element approach

Jiang, L., Nath, C., Samuel, J. & Kapoor, S. G., Dec 1 2012, ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. p. 907-916 10 p. (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical modeling of cutting forces in micro-drilling

Sambhav, K., Tandon, P., Kapoor, S. G. & Dhande, S. G., Dec 1 2012, ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. p. 979-985 7 p. (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process monitoring during micro-drilling via acoustic emission, ultrasonic sound, and spindle load sensors

Bourne, K. A. & Kapoor, S. G., Dec 1 2012, ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. p. 781-790 10 p. (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

Calzada, K. A., Kapoor, S. G., DeVor, R. E., Samuel, J. & Srivastava, A. K., Nov 9 2011, 39th North American Manufacturing Research Conference 2011 - Transactions of the North American Manufacturing Research Institution of SME. p. 332-341 10 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 39).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of the mechanics of the micro-groove cutting process

Bourne, K. A., Kapoor, S. G. & DeVor, R. E., Dec 5 2011, ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011. p. 339-348 10 p. (ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Failure mechanisms encountered in micro-milling of aligned carbon fiber reinforced polymers

Calzada, K. A., Samuel, J., Kapoor, S. G., De Vor, R. E., Srivastava, A. K. & Iverson, J., Nov 16 2010, Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. p. 221-228 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 38).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Three-dimensional simulation of cross-flow microfilter fouling in tortuous pore profiles with semi-synthetic metalworking fluids

Yu, B., Kapoor, S. G. & DeVor, R. E., Dec 1 2010, ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010. p. 447-457 11 p. (ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Effect of carbon nanotube (CNT) loading on the thermo-mechanical properties and the machinabilty of CNT-reinforced polymer composites

Samuel, J., Dikshit, A., DeVor, R. E., Kapoor, S. G. & Hsia, K. J., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. p. 203-214 12 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of microstructural parameters on the machinability of aligned carbon nanotube composites

Samuel, J., Kapoor, S. G., Devor, R. E. & Hsia, K. J., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 443-452 10 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machinability investigation of micro-scale hard turning of 52100 steel

Ellicott, G. J., DeVor, R. E. & Kapoor, S. G., 2009, Transactions of the North American Manufacturing Research Institution of SME - 37th Annual North American Manufacturing Research Conference, NAMRC 37. Vol. 37. p. 143-150 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The impact of surface forces on particle flow and pore blocking in the microfiltration of metalworking fluids

Ham, S., Wentz, J. E., Kapoor, S. G. & DeVor, R. E., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 57-66 10 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

A classification and coding system for micro-assembly

Behera, A. K., Kapoor, S. G. & DeVor, R. E., Mar 26 2008, Micro-Assembly Technologies and Applications: IFIP TC5 WG5.5 Fourth International Precision Assembly Seminar (IPAS'2008) Chamonix, France February 10-13, 2008. Ratchev, S. (ed.). p. 37-53 17 p. (IFIP International Federation for Information Processing; vol. 260).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation of machinability and tool wear in micro-endmilling

Jun, M. B. G., Devor, R. E., Kapoor, S. G. & Englert, F., Sep 29 2008, Transactions of the North American Manufacturing Research Institution of SME - Paper Presented at NAMRC 36. p. 201-208 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 36).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling

Bourne, K. A., Jun, M. B. G., Kapoor, S. G. & DeVor, R. E., Jan 1 2007, Proceedings of the 15th International Symposium on Electromachining, ISEM 2007. Sundaram, M. M., Rajurkar, K. P. & Resnick, R. L. (eds.). Industrial and Management Systems Engineering, p. 625-630 6 p. (Proceedings of the 15th International Symposium on Electromachining, ISEM 2007).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation of a combined drilling and thread milling process: Thrilling

Araujo, A. C., Jun, M. B. G., Kapoor, S. G. & DeVor, R. E., Aug 22 2007, Transactions of the North American Manufacturing Research Institution of SME 2007 - Papers Presented at NAMRC 35. p. 513-520 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 35).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Transiently stable emulsions for metalworking fluids

Bittorf, P. J., Kapoor, S. G., DeVor, R. E. & Rajagopalan, N., Aug 22 2007, Transactions of the North American Manufacturing Research Institution of SME 2007 - Papers Presented at NAMRC 35. p. 343-350 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 35).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2006

Development of an automated microfactory: Part 2 - Experimentation and analysis

Honegger, A. E., Langstaff, G. Q., Phillip, A. G., Vanravenswaay, T. D., Kapoor, S. G., Gauthier, G. W. & Devor, R. E., Sep 21 2006, Transactions of the North American Manufacturing Research Institute of SME 2006 - Papers Presented at NAMRC 34. p. 341-348 8 p. (Transactions of the North American Manufacturing Research Institute of SME; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of an automated microfactory: Part 1 - Microfactory architecture and sub-systems development

Honegger, A. E., Langstaff, G. Q., Phillip, A. G., Vanravenswaay, T. D., Kapoor, S. G., Gauthier, G. W. & Devor, R. E., Sep 25 2006, Transactions of the North American Manufacturing Research Institute of SME 2006 - Papers Presented at NAMRC 34. p. 333-340 8 p. (Transactions of the North American Manufacturing Research Institute of SME; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of a novel metalworking fluid engineered for use with microfiltration recycling

Wentz, J. E., Kapoor, S. G., DeVor, R. E. & Rajagopalan, N., Nov 28 2006, Proceedings of STLE/ASME International Joint Tribology Conference, IJTC 2006. (Proceedings of STLE/ASME International Joint Tribology Conference, IJTC 2006; vol. 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of water phase surface tension and viscosity on metalworking fluid functionality

Bittorf, P. J., Kapoor, S. G., DeVor, R. E. & Rajagopalan, N., Sep 21 2006, Transactions of the North American Manufacturing Research Institute of SME 2006 - Papers Presented at NAMRC 34. p. 555-562 8 p. (Transactions of the North American Manufacturing Research Institute of SME; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2005

Experimental investigation of the machinabilty of polycarbonate reinforced with multiwalled carbon nanotubes

Samuel, J., DeVor, R. E., Kapoor, S. G. & Hsia, K. J., 2005, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. Vol. 16-2. p. 1247-1256 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2003

A process-model based methodology for comprehensive process planning of contour turning operations

Lu, J., Ozdoganlar, O. B., Kapoor, S. G. & DeVor, R. E., 2003, 31st North American Manufacturing Research Conference 2003 - Transactions of the North American Manufacturing Research Institution of SME. Vol. 31. p. 547-554 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluating performance changes due to gradual component depletion in metalworking fluids

Greeley, M. H., DeVor, R. E., Kapoor, S. G. & Rajagopalan, N., Dec 1 2003, 31st North American Manufacturing Research Conference 2003 - Transactions of the North American Manufacturing Research Institution of SME. p. 337-344 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 31).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2002

An architecture for the development of multi-component software tools for virtual manufacturing

Bless, P. N., Kapoor, S. G. & DeVor, R. E., Jan 1 2002, Manufacturing. American Society of Mechanical Engineers (ASME), p. 47-56 10 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling and analysis of internal thread forming

Chowdhary, S., Kapoor, S. G., Ozdoganlar, O. B. & DeVor, R. E., 2002, Technical Paper - Society of Manufacturing Engineers. MR. MR02-172 ed. p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1995

Internet-based model for technology integration and access, Part 1: Software and hardware testbed models

DeVor, R. E., Kapoor, S. G. & Venkatasubramanian, G., 1995, Manufacturing Science and Engineering. ASME, Vol. 2-2. p. 991-1003 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1993

Cumulative performance measures of X-bar charts for process control

Rahn, G. E. & Kapoor, S. G., Dec 1 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, p. 381-390 10 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 64).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dual-mechanism approach to the prediction of machining forces: Part 2 - model implementation and interpretation

Endres, W. J., DeVor, R. E. & Kapoor, S. G., Dec 1 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, p. 577-593 17 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 64).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dual-mechanism approach to the prediction of machining forces: Part 1 - model development and calibration

Endres, W. J., DeVor, R. E. & Kapoor, S. G., Dec 1 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, p. 563-576 14 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 64).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation of the crack growth phenomenon for drilling of fiber-reinforced composite materials

Dipaolo, G., Kapoor, S. G. & DeVor, R. E., 1993, Machining of Advanced Composites. Ramulu, M. & Komanduri, R. (eds.). Publ by ASME, Vol. 45. p. 15-31 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of variable spindle speed face milling for tool-work structures with complex dynamics: part 1 - simulation results

Radulescu, R., Kapoor, S. G. & DeVor, R. E., 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, Vol. 64. p. 603-614 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of variable spindle speed face milling for tool-work structures with complex dynamics: part 2 - physical explanation

Radulescu, R., Kapoor, S. G. & DeVor, R. E., 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, Vol. 64. p. 615-627 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mechanistic approach to predicting the cutting forces in drilling: With application to fiber-reinforced composite materials

Chandrasekharan, V., Kapoor, S. G. & DeVor, R. E., Dec 1 1993, Machining of Advanced Composites. Ramulu, M. & Komanduri, R. (eds.). Publ by ASME, p. 33-51 19 p. (American Society of Mechanical Engineers, Materials Division (Publication) MD; vol. 45).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1992

Piezoelectric tool servo system for variable depth of cut machining

Rasmussen, J. D., Tsao, T. C., Hanson, R. D. & Kapoor, S. G., Dec 1 1992, Precision Machining: Technology and Machine Development and Improvement. Publ by ASME, p. 119-130 12 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 58).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1991

Development of operational characteristics and diagnostic procedures for X̄ control charts

Rahn, G. E., Kapoor, S. G. & DeVor, R. E., Dec 1 1991, Sensors, Controls, and Quality Issues in Manufacturing. Publ by ASME, p. 403-419 17 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 55).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model for the prediction of bore cylindricity during machining

Subramani, G., Kapoor, S. G. & DeVor, R. E., Dec 1 1991, Sensors, Controls, and Quality Issues in Manufacturing. Publ by ASME, p. 271-286 16 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 55).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation and control of FMSs using a data-configurable colored petri net system

Ferreira, P. M., Menon, S. R. & Kapoor, S. G., Dec 1 1991, Planning and Control of Material Handling Systems. Publ by ASME, p. 67-83 17 p. (American Society of Mechanical Engineers, Material Handling Division, MHD; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution