If you made any changes in Pure these will be visible here soon.

Research Output

2020

Modeling of variable friction and heat partition ratio at the chip-tool interface during orthogonal cutting of Ti-6Al-4V

Mane, S., Joshi, S. S., Karagadde, S. & Kapoor, S. G., Jul 2020, In : Journal of Manufacturing Processes. 55, p. 254-267 14 p.

Research output: Contribution to journalArticle

2019

Experimental comparison of micromilling pure titanium and Ti-6Al-4V

De Oliveira Campos, F., Araujo, A. C. & Kapoor, S. G., Jun 2019, In : Journal of Micro and Nano-Manufacturing. 7, 2, 024506.

Research output: Contribution to journalArticle

Experimental investigation of bubble-mixed cutting fluid delivery for micro deep-hole drilling

Lee, C. T., Mujumdar, S. S. & Kapoor, S. G., Jun 2019, In : Journal of Micro and Nano-Manufacturing. 7, 2, 024508.

Research output: Contribution to journalArticle

Finite volume simulation framework for die casting with uncertainty quantification

Shahane, S., Aluru, N., Ferreira, P., Kapoor, S. G. & Vanka, S. P., Oct 2019, In : Applied Mathematical Modelling. 74, p. 132-150 19 p.

Research output: Contribution to journalArticle

Modeling of material removal in atomized dielectric-based electrical discharge machining (EDM)

Tanveer, A., Kapoor, S. G. & Mujumdar, S. S., Jan 1 2019, Processes; Materials. American Society of Mechanical Engineers (ASME), (ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulations of die casting with uncertainty quantification

Shahane, S., Mujumdar, S., Kim, N., Priya, P., Aluru, N. R., Ferreira, P., Kapoor, S. G. & Vanka, S., Apr 1 2019, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 141, 4, 041003.

Research output: Contribution to journalArticle

2018

Machine-Tool error observer design with application to thermal error tracking

Ko, H. W., Kapoor, S. G., Ferreira, P. M., Bazzoli, P., Adam Nisbett, J., Bristow, D. & Chen, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quasistatic error modeling and model testing for a 5-axis machine with a redundant axis

Ko, H. W., Bazzoli, P., Nisbett, J. A., Ma, L., Bristow, D., Landers, R. G., Chen, Y., Kapoor, S. G. & Ferreira, P. M., Jan 1 2018, In : Journal of Manufacturing Processes. 31, p. 875-883 9 p.

Research output: Contribution to journalArticle

Virtually-guided certification with uncertainty quantification applied to die casting

Shahane, S., Mujumdar, S., Kim, N., Priya, P., Aluru, N., Ferreira, P., Kapoor, S. G. & Vanka, S., Jan 1 2018, ASME 2018 Verification and Validation Symposium, VVS 2018. American Society of Mechanical Engineers (ASME), (ASME 2018 Verification and Validation Symposium, VVS 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Editorial for the special issue on advanced processing technology for selected papers from ICFDM2016

Shih, A., Lai, Y., Kapoor, S. G., Huang, C. & Tao, F., Aug 2017, In : Journal of Manufacturing Processes. 28, 1 p.

Research output: Contribution to journalEditorial

Finish turning of Ti-6Al-4V with the atomization-based cutting fluid (ACF) spray system

Nath, C., Kapoor, S. G. & Srivastava, A. K., Aug 2017, In : Journal of Manufacturing Processes. 28, p. 464-471 8 p.

Research output: Contribution to journalArticle

Micro-milling Machinability of DED Additive Titanium Ti-6Al-4V

Bonaiti, G., Parenti, P., Annoni, M. & Kapoor, S., Jan 1 2017, In : Procedia Manufacturing. 10, p. 497-509 13 p.

Research output: Contribution to journalArticle

Quasistatic Error Modeling and Model Testing for a 5-Axis Machine

Ko, H. W., Bazzoli, P., Nisbett, J. A., Ma, L., Bristow, D., Landers, R. G., Chen, Y., Kapoor, S. G. & Ferreira, P. M., Jan 1 2017, In : Procedia Manufacturing. 10, p. 443-455 13 p.

Research output: Contribution to journalArticle

2016

A computational model to study film formation and debris flushing phenomena in spray-electric discharge machining

Pattabhiraman, A., Marla, D. & Kapoor, S. G., Sep 1 2016, In : Journal of Micro and Nano-Manufacturing. 4, 3, 031002.

Research output: Contribution to journalArticle

A computational model to study film formation and debris flushing phenomena in spray- electric discharge machining

Pattabhiraman, A., Marla, D. & Kapoor, S. G., Sep 2016, In : Journal of Micro and Nano-Manufacturing. 4, 3, 031002.

Research output: Contribution to journalArticle

Advances in fluid dynamic modeling of microfiltration processes

Wentz, J. E., DeVor, R. E. & Kapoor, S. G., Apr 19 2016, Nanoparticle Heat Transfer and Fluid Flow. CRC Press, p. 215-247 33 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

A thermal model to predict tool temperature in machining of TI-6AL-4V alloy with an atomization-based cutting fluid spray system

Tanveer, A., Marla, D. & Kapoor, S. G., Jan 1 2016, Processing. American Society of Mechanical Engineers, (ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Atomized dielectric spray-based electric discharge machining (Spray-EDM) for sustainable manufacturing

Pattabhiraman, A., Marla, D. & Kapoor, S. G., Jan 1 2015, Processing. American Society of Mechanical Engineers, (ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of interparticle interaction on particle deposition in a crossflow microfilter

Jubery, T. Z., Kapoor, S. G. & Wentz, J. E., Jan 1 2015, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 137, 1, 011001.

Research output: Contribution to journalArticle

Force modeling of five-axis microball-end milling

Xu, C., Zhu, J. & Kapoor, S. G., Jan 1 2015, In : Journal of Micro and Nano-Manufacturing. 3, 3, 031007.

Research output: Contribution to journalArticle

2014

An enhanced microstructure-level finite element machining model for carbon nanotube (CNT)-polymer composites

Jiang, L., Nath, C., Samuel, J. & Kapoor, S. G., Jan 1 2014, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), V002T02A034. (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling of melt-pool formation and material removal in micro electro-discharge machining

Mujumdar, S. S., Curreli, D., Kapoor, S. G. & Ruzic, D. N., Jan 1 2014, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

A porous-restricted aerostatic lead screw actuator for high performance microscale machine tools

Zhu, J., Kapoor, S. G., Devor, R. E. & Park, J. K., Jan 17 2013, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 135, 1, 011002.

Research output: Contribution to journalArticle

Characterization of fluid film produced by an atomization-based cutting fluid (ACF) spray system during machining

Hoyne, A. C., Nath, C. & Kapoor, S. G., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1187. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cutting temperature measurement during titanium machining with an atomization-based cutting fluid (ACF) spray system

Hoyne, A. C., Nath, C. & Kapoor, S. G., Jan 1 2013, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of fluid concentration in titanium machining with an atomization-based cutting fluid (ACF) spray system

Nath, C., Kapoor, S. G., Srivastava, A. K. & Iverson, J., Oct 1 2013, In : Journal of Manufacturing Processes. 15, 4, p. 419-425 7 p.

Research output: Contribution to journalArticle

Effect of fluid concentration in titanium machining with an Atomization-based Cutting Fluid (ACF) spray system

Nath, C., Kapoor, S. G., Srivastava, A. K. & Iverson, J., Dec 1 2013, 41st North American Manufacturing Research Conference 2013 - Transactions of the North American Manufacturing Research Institution of SME, NAMRC 2013. p. 650-656 7 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 41).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of inter-particle interaction on particle deposition in a cross-flow microfilter

Jubery, T. Z., Kapoor, S. G. & Wentz, J. E., Dec 18 2013, ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013. MSEC2013-1211. (ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Finite element-based study of the mechanics of microgroove cutting

Bourne, K. A., Kapoor, S. G. & DeVor, R. E., Jun 1 2013, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 135, 3, 031015.

Research output: Contribution to journalArticle

Mathematical modeling of cutting forces in microdrilling

Sambhav, K., Tandon, P., Kapoor, S. G. & Dhande, S. G., Jan 15 2013, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 135, 1, 014501.

Research output: Contribution to journalArticle

2012

A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

Krejcie, A. J., Kapoor, S. G. & Devor, R. E., Jan 1 2012, In : Journal of Manufacturing Processes. 14, 1, p. 26-34 9 p.

Research output: Contribution to journalArticle

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Nath, C., Kapoor, S. G., Devor, R. E., Srivastava, A. K. & Iverson, J., Oct 1 2012, In : Journal of Manufacturing Processes. 14, 4, p. 452-459 8 p.

Research output: Contribution to journalArticle