Seid Koric

PhD Engineering, University of Illinois

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Multiphysics modeling of continuous casting of stainless steel

Zappulla, M. L. S., Cho, S. M., Koric, S., Lee, H. J., Kim, S. H. & Thomas, B. G., Apr 2020, In : Journal of Materials Processing Technology. 278, 116469.

Research output: Contribution to journalArticle

2019

A Multiscale Homogenization Approach for Architectured Knitted Textiles

Liu, D., Koric, S. & Kontsos, A., Jun 13 2019, (Accepted/In press) In : Journal of Applied Mechanics, Transactions ASME. p. 1-27

Research output: Contribution to journalArticle

Hierarchical measurement strategy for cost-effective interpolation of spatiotemporal data in manufacturing

Yang, Y., Zhang, Y., Cai, Y. D., Lu, Q., Koric, S. & Shao, C., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 159-168 10 p.

Research output: Contribution to journalArticle

Parallelized finite element analysis of knitted textile mechanical behavior

Liu, D., Koric, S. & Kontsos, A., Apr 1 2019, In : Journal of Engineering Materials and Technology, Transactions of the ASME. 141, 2, 021008.

Research output: Contribution to journalArticle

Reducing the Time-to-Solution for Finite Element Analysis of Gas Turbine Engines

Simons, T. A., Ong, J., Lucas, R., Rouet, F., Grimes, R., Gulyeruz, E., Koric, S., Zhu, T. & Dawson, J., Aug 16 2019.

Research output: Contribution to conferencePaper

Running Jet Engine Models on Thousands of Processors with LS-DYNA Implicit

Ashcraft, C., Dawson, J., Grimes, R., Guleryuz, E., Koric, S., Lucas, R., Ong, J., Rouet, F-H., Simons, T. & Zhu, T-T., 2019.

Research output: Contribution to conferencePaper

2018

Convergence Analyses for Fluid-Structure Interaction Simulation in a Thin Hyper-elastic Pipe

Lu, Q., Guleryuz, E., Vellakal, M., Taha, A., Koric, S. & Cordoba, P., 2018. 14 p.

Research output: Contribution to conferencePaper

Fracture analysis of multi-osteon cortical bone using XFEM

Idkaidek, A., Koric, S. & Jasiuk, I., Aug 1 2018, In : Computational Mechanics. 62, 2, p. 171-184 14 p.

Research output: Contribution to journalArticle

High-performance computing based big data analytics for smart manufacturing

Yang, Y., Dora Cai, Y., Lu, Q., Zhang, Y., Koric, S. & Shao, C., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of Microjets Flow Condition on a Dump Combustor Reacting Flow Characteristics

Vellakal, M., Taha, A., Sami, M., Koric, S. & Lu, Q., 2018. 10 p.

Research output: Contribution to conferencePaper

Parallel mesh partitioning based on space filling curves

Borrell, R., Cajas, J. C., Mira, D., Taha, A., Koric, S., Vázquez, M. & Houzeaux, G., Sep 15 2018, In : Computers and Fluids. 173, p. 264-272 9 p.

Research output: Contribution to journalArticle

2017

Analytical and computational analysis of strength properties of geopolymer composites

Kataruka, A., Guleryuz, E., Koric, S., M. Kriven, W. & Akono, A-T., Jun 26 2017.

Research output: Contribution to conferencePaper

Comparison of characteristics of flow around a sphere with trip wire using different turbulence modeling approaches

Koric, S., Vellakal, M., Taha, A. & Torlak, M., Jan 1 2017, Advances in Aerospace Technology. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

INFLUENCE OF TISSUE LEVEL PLASTICITY ON APPARENT RESPONSE OF TRABECULAR BONE

Koric, S., Sabet, F. A. & Jasiuk, I. M., 2017. 3 p.

Research output: Contribution to conferencePaper

Molecular dynamics study on the mechanical and fracture properties of geopolymer binders

Cui, Y., Guleryuz, E., Kriven, W., Koric, S. & Akono, A-T., Jun 26 2017.

Research output: Contribution to conferencePaper

Representative Elementary Volume Modeling of Geopolymer Composites

Kataruka, A., Guleryuz, E., Koric, S., M. Kriven, W. & Akono, A-T., Jul 1 2017. 1 p.

Research output: Contribution to conferencePaper

Strength Properties of Particulate Potassium-Based Geopolymer Composites: A Computational Study

Kataruka, A., Guleryuz, E., Koric, S., M. Kriven, W. & Akono, A-T., Jun 7 2017.

Research output: Contribution to conferencePaper

2016

Alya: Multiphysics engineering simulation toward exascale

Vázquez, M., Houzeaux, G., Koric, S., Artigues, A., Aguado-Sierra, J., Arís, R., Mira, D., Calmet, H., Cucchietti, F., Owen, H., Taha, A., Burness, E. D., Cela, J. M. & Valero, M., May 1 2016, In : Journal of Computational Science. 14, p. 15-27 13 p.

Research output: Contribution to journalArticle

DIRECT NUMERICAL SIMULATION OF BONE PLASTICITY AND STRENGTH

Koric, S., Sabet, F. A., Jin, O. & Jasiuk, I. M., 2016. 3 p.

Research output: Contribution to conferencePaper

Effective minimally-invasive GPU acceleration of distributed sparse Matrix factorization

Gupta, A., Gimelshein, N., Koric, S. & Rennich, S., Jan 1 2016, Parallel Processing - 22nd International Conference on Parallel and Distributed Computing, Euro-Par 2016, Proceedings. Dutot, P-F. & Trystram, D. (eds.). Springer-Verlag Berlin Heidelberg, p. 672-683 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9833 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of parallel direct sparse linear solvers in electromagnetic geophysical problems

Puzyrev, V., Koric, S. & Wilkin, S., Apr 1 2016, In : Computers and Geosciences. 89, p. 79-87 9 p.

Research output: Contribution to journalArticle

Finite Element Simulation and X-Ray Microdiffraction Study of Strain Partitioning in a Layered Nanocomposite

Barabash, R. I., Agarwal, V., Koric, S., Jasiuk, I. & Tischler, J. Z., Jan 1 2016, In : Journal of Crystallography. 2016, p. 1-11

Research output: Contribution to journalArticle

HIERARCHICAL MODELING OF PLASTICITY AND STRENGTH OF TRABECULAR BONE

Jasiuka, I., Sabet, F., Abueidda, D. W., Hamed, E., Jin, O. & Koric, S., 2016. 2 p.

Research output: Contribution to conferencePaper

Performance test of parallel linear equation solvers on Blue Waters--Cray XE6/XK7 system

Kwack, J., Bauer, G. & Koric, S., 2016. 12 p.

Research output: Contribution to conferencePaper

Sparse matrix factorization in the implicit finite element method on petascale architecture

Koric, S. & Gupta, A., Apr 15 2016, In : Computer Methods in Applied Mechanics and Engineering. 302, p. 281-292 12 p.

Research output: Contribution to journalArticle

2015

3D multi-source CSEM simulations: Feasibility and comparison of parallel direct solvers

Puzyrev, V. & Koric, S., Jan 1 2015, In : SEG Technical Program Expanded Abstracts. 34, p. 833-838 6 p.

Research output: Contribution to journalConference article

DES of turbulent flow around a sphere with trip wire

Torlak, M., Halač, A., Roesler, S. & Koric, S., Sep 17 2015.

Research output: Contribution to conferencePaper

DES of turbulent flow around a sphere with trip wire

Torlak, M., Halač, A., Roesler, S. & Korić, S., Jan 1 2015, In : Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer. 0, p. 307-310 4 p.

Research output: Contribution to journalConference article

Elasto Visco-Plastic Model of Steel Solidification with Local Damage and Failure

Murali, A., Koric, S. & Thomas, B. G., 2015. 3 p.

Research output: Contribution to conferencePaper

Scaling and bounds in thermal conductivity of planar Gaussian correlated microstructures

Kale, S., Saharan, A., Koric, S. & Starzewski, M. O., Mar 14 2015, In : Journal of Applied Physics. 117, 10, 104301.

Research output: Contribution to journalArticle

Stochastic Continuum Damage Mechanics Using Spring Lattice Models

Kale, S., Koric, S. & Ostoja-starzewski, M., Aug 18 2015, In : Applied Mechanics and Materials. 784, p. 350-357

Research output: Contribution to journalArticle

U.S. Industrial Supercomputing at NCSA

Giles, M., Koric, S. & Burness, E., Apr 1 2015, Industrial Applications of High-Performance Computing: Best Global Practices. Osseyran, A. & Giles, M. (eds.). CRC Press, p. 179-194 16 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2014

Alya: Towards Exascale for Engineering Simulation Codes

Vazquez, M., Houzeaux, G., Koric, S., Artigues, A., Aguado-Sierra, J., Aris, R., Mira, D., Calmet, H., Cucchietti, F., Owen, H., Taha, A. & Cela, J. M., Apr 18 2014. 20 p.

Research output: Contribution to conferencePaper

Precision structural engineering of self-rolled-up 3D nanomembranes guided by transient quasi-static FEM modeling

Huang, W., Koric, S., Yu, X., Hsia, K. J. & Li, X., Nov 12 2014, In : Nano letters. 14, 11, p. 6293-6297 5 p.

Research output: Contribution to journalArticle

Visco-Plastic Multi-Physics Modeling of Steel Solidification

Koric, S. & Thomas, B. G., 2014. 3 p.

Research output: Contribution to conferencePaper

XSEDE OpenACC workshop enables blue waters researchers to accelerate key algorithms

Arnold, G., Gajbe, M., Koric, S. & Urbanic, J., Jan 1 2014, Proceedings of the XSEDE 2014 Conference: Engaging Communities. Association for Computing Machinery, 28. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Fractal geometric characterization of functionally graded materials

Saharan, A., Starzewski, M. O. & Koric, S., Nov 26 2013, In : Journal of Nanomechanics and Micromechanics. 3, 4, 04013001.

Research output: Contribution to journalArticle

Fracture model for cemented aggregates

Zubelewicz, A., Thompson, D. G., Ostoja-Starzewski, M., Ionita, A., Shunk, D., Lewis, M. W., Lawson, J. C., Kale, S. & Koric, S., Feb 26 2013, In : AIP Advances. 3, 1, 012119.

Research output: Contribution to journalArticle

Multiphysics Simulation of Metal Solidification Processes with Abaqus

Koric, S., Thomas, B. G. & Hibbeler, L. C., 2013. 10 p.

Research output: Contribution to conferencePaper

2012
2011

Multiphysics model of continuous casting of steel beam-blanks

Thomas, B. G., Koric, S., Hibbeler, L. C. & Liu, R., 2011.

Research output: Contribution to conferencePaper

2010

Enhanced latent heat method to incorporate superheat effects into fixed-grid multiphysics simulations

Koric, S., Thomas, B. G. & Voller, V. R., Jun 1 2010, In : Numerical Heat Transfer, Part B: Fundamentals. 57, 6, p. 396-413 18 p.

Research output: Contribution to journalArticle

Multiphysics model of metal solidification on the continuum level

Koric, S., Hibbeler, L. C., Liu, R. & Thomas, B. G., Dec 1 2010, In : Numerical Heat Transfer, Part B: Fundamentals. 58, 6, p. 371-392 22 p.

Research output: Contribution to journalArticle

2009

Coupled Visco-Plastic Thermo-Mechanical Models of Steel Solidification

Koric, S., Hibbeler, L. C. & Thomas, B. G., 2009. 3 p.

Research output: Contribution to conferencePaper

Explicit coupled thermo-mechanical finite-element model of continuous casting of steel in funnel molds

Koric, S., Hibbeler, L. C. & Thomas, B., Dec 1 2009, Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. p. 137-148 12 p. (Proceedings from the 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Explicit coupled thermo-mechanical finite element model of steel solidification

Koric, S., Hibbeler, L. C. & Thomas, B. G., Apr 14 2009, In : International Journal for Numerical Methods in Engineering. 78, 1, p. 1-31 31 p.

Research output: Contribution to journalArticle

Sparse linear solvers on massively parallel machines

Gupta, A., Koric, S. & George, T., 2009, ACM/IEEE Conference on High Performance Computing SC 2009. p. 14-20 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution