No photo of Armand Joseph Beaudoin

View Scopus Profile

Armand Joseph Beaudoin, Jr.

Filter
Conference contribution

Search results

  • 2021

    Understanding Twinning-Detwinning Behavior of Unalloyed Mg During Low-Cycle Fatigue Using High Energy X-ray Diffraction

    Murphy-Leonard, A. D., Pagan, D. C., Beaudoin, A., Miller, M. P. & Allison, J. E., 2021, Magnesium Technology 2021. Miller, V. M., Maier, P., Jordon, J. B. & Neelameggham, N. R. (eds.). Springer, p. 71-72 2 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2010

    Investigation of the PLC effect using DIC

    Storer, R. N., Beaudoin, A. J. & Kurath, P., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. American Society of Mechanical Engineers (ASME), p. 171-175 5 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2009

    Characterization of edge cracking using a crystal plasticity model with damage evolution

    Kweon, S., Beaudoin, A. J. & McDonald, R. J., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. p. 1201-1206 6 p. (TMS Annual Meeting).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Characterization of edge cracking using a crystal plasticity model with damage evolution

    Kweon, S., Beaudoin, A. J. & McDonald, R. J., 2009, Light Metals 2009 - Proceedings of the Technical Sessions Presented by the TMS Aluminum Committee at the TMS 2009 Annual Meeting and Exhibition. p. 1203-1208 6 p. (TMS Light Metals).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Effect of dynamic strain aging on fracture in aluminum alloy sheet materials AA5754

    Kang, J., Wilkinson, M. D. S., Beaudoin, A. J., Embury, J. D. & Mishra, R. K., 2009, 12th International Conference on Fracture 2009, ICF-12. p. 5809-5818 10 p. (12th International Conference on Fracture 2009, ICF-12; vol. 8).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Mechanistic study of delamination fracture in Al-Li alloy C458 (2099)

    Tayon, W. A., Crooks, R. E., Domack, M. S., Wagner, J. A., Beaudoin, A. J. & McDonald, R. J., 2009, 12th International Conference on Fracture 2009, ICF-12. p. 7111-7120 10 p. (12th International Conference on Fracture 2009, ICF-12; vol. 9).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Relationship between inhomogeneous deformation and local texture in zirconium from multiscale image correlation

    Padilla, H., Lambros, J., Beaudoin, A. & Robertson, I., 2009, Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009. p. 921-930 10 p. (Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Spatiotemporal thermal inhomogeneities during adiabatic compression of highly textured zirconium

    Padilla, H., Lambros, J., Beaudoin, A. & Robertson, I., 2009, Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009. p. 759-768 10 p. (Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2008

    Effects of deformation inhomogeneity on plastic dissipation in zirconium

    Padilla, H. A., Smith, C. D., Lambros, J., Beaudoin, A. J. & Robertson, I. M., 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. p. 1608-1615 8 p. (Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Modeling rolling texture of twinned Cu single crystals

    Al-Fadhalah, K., Beaudoin, A. & Niewczas, M., 2008, Materials Processing and Texture - A Collection of Papers Presented at the 15th International Conference on Textures of Materials, ICOTOM 15. American Ceramic Society, p. 665-670 6 p. (Ceramic Transactions; vol. 200).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2006

    Evolution of microstructure and plastic dissipation in zirconium during high rate deformation

    Padilla, H. A., Smith, C. D., Beaudoin, A. J., Lambros, J. & Robertson, I. M., 2006, Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006. p. 824-828 5 p. (Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heterogeneity in plastic deformation

    Mach, J. C., Kang, J., Beaudoin, A. J. & Wilkinson, D. S., 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 1 ed. Trans Tech Publications Ltd, p. 85-92 8 p. (Materials Science Forum; vol. 519-521, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
  • 2003

    High temperature deformation and hot rolling of AA7055

    Padilla, H. A., Harnish, S. F., Gore, B. E., Beaudoin, A. J., Dantzig, J. A., Robertson, I. M. & Weiland, H., 2003, Metallurgical Modeling for Aluminum Alloys - Proceedings from Materials Solutions Conference 2003: 1st International Symposium on Metallurgical Modeling for Aluminum Alloys. Tiryakioglu, M. & Lalli, L. A. (eds.). p. 1-8 8 p. (Metallurgical Modeling for Aluminum Alloys - Proceedings from Materials Solutions Conference 2003: 1st International Symposium on Metallurgical Modeling for Aluminum Alloys).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2001

    A study of the kinetics in stress relaxation of AA 5182

    Zhu, L., Beaudoin, A. J. & MacEwen, S. R., 2001, Microstructure Modeling and Prediction During Thermomechanical Processing. Srinivasan, R., Semiatin, S. L., Beaudoin, A., Fox, S., Jin, Z., Srinivasan, R., Semiatin, S., Beaudoin, A., Fox, S. & Jin, Z. (eds.). p. 189-199 11 p. (Microstructure Modeling and Prediction During Thermomechanical Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Microstructure Modeling and Prediction During Thermomechnical Processing: Foreword

    Srinivasan, R., Semiatin, S. L., Beaudoin, A., Fox, S. & Jin, Z., 2001, Microstructure Modeling and Prediction During Thermomechanical Processing. Srinivasan, R., Semiatin, S. L., Beaudoin, A., Fox, S., Jin, Z., Srinivasan, R., Semiatin, S., Beaudoin, A., Fox, S. & Jin, Z. (eds.). p. ix (Microstructure Modeling and Prediction During Thermomechanical Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2000

    Measurement of the material state including the effects of recovery and recrystallization

    Bange, M. E., Beaudoin, A. J., Stout, M. G. & MacEwen, S. R., 2000, Manufacturing Engineering. American Society of Mechanical Engineers (ASME), p. 649-654 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2000-X).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 1992

    Crystallographic texture effects in hydroforming of aluminum sheet

    Dawson, P. R., Beaudoin, A. J., Mathur, K. K., Kocks, U. F. & Korzekwa, D. A., 1992, Numerical Methods for Simulation of Industrial Metal Forming Processes. Publ by ASME, p. 1-10 10 p. (American Society of Mechanical Engineers, Computer Engineering Division, CED; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 1986

    MATHEMATICAL MODELLING OF HOT ROLLING OF ALUMINUM.

    Beaudoin, A. J. & Woodbury, K. A., 1986, Unknown Host Publication Title. Inst of Metals, p. 628-634 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution