If you made any changes in Pure, your changes will be visible here soon.

Research Output 1989 2019

Filter
Conference contribution
2017

Effect of inclination on heat transfer in large flattened-tube steam condensers

Davies, W. A., Kang, Y., Hrnjak, P. S. & Jacobi, A. M., Jan 1 2017, Energy. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 6).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condenser tubes
Steam
Visualization
Heat transfer
Void fraction

Maximum likelihood method for energy balance error correction in heat exchanger data

Park, Y. G., Liu, L. & Jacobi, A. M., Jan 1 2017, Heat Transfer Equipment; Heat Transfer in Multiphase Systems; Heat Transfer Under Extreme Conditions; Nanoscale Transport Phenomena; Theory and Fundamental Research in Heat Transfer; Thermophysical Properties; Transport Phenomena in Materials Processing and Manufacturing. American Society of Mechanical Engineers, HT2017-4972. (ASME 2017 Heat Transfer Summer Conference, HT 2017; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Error correction
heat exchangers
Energy balance
Maximum likelihood
Heat exchangers

The impact of base metal on the thermal-hydraulic performance of metal foam heat exchanger for cooling and dehumidification applications

Nawaz, K. & Jacobi, A. M., Jan 1 2017, Heat Transfer Equipment; Heat Transfer in Multiphase Systems; Heat Transfer Under Extreme Conditions; Nanoscale Transport Phenomena; Theory and Fundamental Research in Heat Transfer; Thermophysical Properties; Transport Phenomena in Materials Processing and Manufacturing. American Society of Mechanical Engineers, HT2017-4892. (ASME 2017 Heat Transfer Summer Conference, HT 2017; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

dehumidification
metal foams
heat exchangers
hydraulics
Heat exchangers

Thermal-hydraulic performance of R-134a boiling at low mass fluxes in a small vertical brazed plate heat exchanger

Kim, H. J., Liebenberg, L. & Jacobi, A. M., Jan 1 2017, Heat Transfer Equipment; Heat Transfer in Multiphase Systems; Heat Transfer Under Extreme Conditions; Nanoscale Transport Phenomena; Theory and Fundamental Research in Heat Transfer; Thermophysical Properties; Transport Phenomena in Materials Processing and Manufacturing. American Society of Mechanical Engineers, HT2017-5083. (ASME 2017 Heat Transfer Summer Conference, HT 2017; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat exchangers
hydraulics
boiling
Boiling liquids
Heat exchangers
2016

Dehumidification performance of mass exchangers consisting of silica aerogel coated metal foams

Nawaz, K., Schmidt, S. J. & Jacobi, A. M., Jan 1 2016, Energy. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 6A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerogels
Foams
Enthalpy
Wheels
Silica
2015

Metal surface wettability manipulation by nanoparticle deposition during nanofluid boiling

Zhang, F. & Jacobi, A. M., Jan 1 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, (ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Wetting
Metals
Nanoparticles
Heat transfer

Thermodynamic analysis of the transition between slug and annular flow in minichannels

Khovalyg, D. M., Hrnjak, P. S. & Jacobi, A. M., Jan 1 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, (ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Two phase flow
Thermodynamics
Microchannels
Flow patterns
Boiling liquids

Thermo-responsive polymer grafted aluminum surface to actively modulate water wettability

Zhang, F., Lai, S., Jacobi, A. M. & Braun, P. V., Jan 1 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wetting
Aluminum
Polymers
Water
Temperature

Water-repellent slippery surfaces for HVAC&R systems

Yu, R. & Jacobi, A. M., Jan 1 2015, Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems. American Society of Mechanical Engineers, (ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Water
Heat exchangers
Defrosting
Liquids
Surface potential
2014

Interactions between parallel minichannels during flow boiling of R134A

Khovalyg, D. M., Hrnjak, P. S., Baranenko, A. V. & Jacobi, A. M., Jan 1 2014, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2014, Collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, (ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2014, Collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Pressure drop
Heat flux
Mass transfer
Flow visualization
2013

Effect of catalyst used in the Sol-Gel process on the microstructure and adsorption/desorption performance of silica aerogels

Nawaz, K., Schmidt, S. J. & Jacobi, A. M., Jan 1 2013, Emerging Technologies. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerogels
Sol-gel process
Desorption
Silica
Adsorption
2011

Analysis of sound attenuation in elliptical chamber mufflers by using Green's functions

Banerjee, S. & Jacobi, A. M., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 773-778 6 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mufflers
Green's function
Acoustic waves
Pistons
Boundary conditions

Experimental study of subcooled pool boiling heat transfer on metal foam

Shi, J., Jacobi, A. M. & Chen, Z., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 10. p. 559-564 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Foams
Heat transfer
Metals
Hysteresis

Experimental study of wetting anisotropy and condensate drainage enhancement on microgrooved aluminum surface

Rahman, M. A. & Jacobi, A. M., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. p. 51-59 9 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 10, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drainage
Wetting
Anisotropy
Aluminum
Defrosting

Heat transfer performance for a falling-film on horizontal flat tubes

Wang, X., Hrnjak, P. S., Elbel, S., Jacobi, A. M. & He, M. G., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. p. 43-50 8 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 10, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat flux
Heat transfer
Nusselt number
Heat transfer coefficients
Flow rate

Intertube falling-film heat transfer behavior of multiwall carbon nanotube suspensions (MWCNT nanofluids)

Ruan, B. & Jacobi, A. M., 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanotubes
Ethylene glycol
Heat transfer
Heat transfer coefficients
Thermal conductivity

Optimization of polymer tube-bundle heat exchangers using a genetic algorithm

Meng, L. & Jacobi, A. M., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. p. 621-631 11 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tubes (components)
Heat exchangers
Genetic algorithms
Polymers
Geometry

Wetting behavior and drainage of water droplets on microgrooved brass surface

Rahman, M. A. & Jacobi, A. M., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 10. p. 61-69 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brass
Drainage
Wetting
Water
Hysteresis
2010

An experimental study of condensate retention on the air side of flat-tube heat exchangers

Gupta, D., Park, Y. G. & Jacobi, A. M., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 227-234 8 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tubes (components)
Drainage
Heat exchangers
Air
Geometry

Conjugate mixed convection with surface radiation and substrate conduction in laminar channel flow with discrete flush mounted heat sources

He, J. & Jacobi, A. M., Dec 1 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. Vol. 4. p. 227-234 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mixed convection
Channel flow
Radiation
Substrates
Reynolds number

Heat transfer of falling film flowing around a horizontal tube with nanofluids

Ruan, B., Jacobi, A. M. & Li, L., Jul 12 2010, Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009. p. 643-652 10 p. (Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer
Thermal conductivity
Aluminum Oxide
Viscosity
Heat exchangers
2009

Air-side heat transfer enhancement by a novel winglet-type vortex generator array in around-tube plain-fin heat exchanger

He, J., Liu, L. & Jacobi, A. M., Dec 1 2009, Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009. p. 575-582 8 p. (Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat exchangers
Vortex flow
Heat transfer
Reynolds number
Angle of attack

Modeling the retention of water droplets on topographically-modified, micro-grooved aluminum

Sommers, A. D. & Jacobi, A. M., 2009, 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008. Vol. 2. p. 317-326 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Water
Wetting
Syringes
Contact angle

Numerical modeling of liquid drop spreading behavior on inclined surfaces

Park, Y. G. & Jacobi, A. M., 2009, Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009. Vol. 3. p. 367-373 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquids
Contact angle
Vapors
Contacts (fluid mechanics)
Hysteresis
2005

The case for horizontal launch of large exploration payloads

Burton, R. L., Brown, K., Jacobi, A. M. & Michna, G., Dec 15 2005, A Collection of Technical Papers - 1st Space Ecploration Conference: Continuing the Voyage of Discovery. p. 1043-1051 9 p. (A Collection of Technical Papers - 1st Space Exploration Conference: Continuing the Voyage of Discovery; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Costs
Space shuttles
Reusability
Liquefaction
Propulsion
2003

A concept inventory for heat transfer

Jacobi, A. M., Martin, J., Mitchell, J. & Newell, T., Jan 1 2003, 33rd Annual Frontiers in Education: Engineering as a Human Endeavor: Partnering Community, Academia, Government, and Industry, FIE 2003 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., p. T3D12-T3D16 1263338. (Proceedings - Frontiers in Education Conference, FIE; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat
Students
Heat transfer
student
intuition

Combining liquid air cycles with turbine engines for RLVS

Sebens, J. M., Burton, R. L., Jacobi, A. M., Brown, K. A. & Michna, G. J., Dec 1 2003, 12th AIAA International Space Planes and Hypersonic Systems and Technologies. (12th AIAA International Space Planes and Hypersonic Systems and Technologies).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

turbine engines
liquid air
liquefaction
turbine
liquid air cycle engines

Minimum-mass heat exchanger design for hypersonic vehicles

Sebens, J. M., Burton, R. L. & Jacobi, A. M., Dec 1 2003, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. (39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hypersonic vehicles
Heat exchangers
Air
Heat transfer
Condensers (liquefiers)
1999

Integrated mesoscopic cooler circuits (IMCCS)

Shannon, M. A., Philpott, M. L., Miller, N. R., Bullard, C. W., Beebe, D. J., Jacobi, A. M., Hrnjak, P. S., Saif, M. T. A., Aluru, N. R., Sehitoglu, H., Rockett, A. & Economy, J., Dec 1 1999, American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES. ASME, p. 75-82 8 p. (American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES; vol. 39).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Networks (circuits)
Refrigeration
Vapors
Cooling
Fabrication
1994

Condensation-induced shock and vapor-propelled liquid slugging in refrigerant lines

Shelton, J. C. & Jacobi, A. M., 1994, Fluid Transients 1994. ASME, Vol. 198. p. 43-50 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Refrigerants
Refrigeration
Condensation
Vapors
Liquids
1992

Droplet and retained condensate effects on local convective heat transfer for annularly-finned tubes in cross flow

Hu, X., Zhang, L. & Jacobi, A. M., Dec 1 1992, Institution of Chemical Engineers Symposium Series. 129 ed. Publ by Inst of Chemical Engineers, p. 261-247 15 p. (Institution of Chemical Engineers Symposium Series; vol. 1, no. 129).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fins (heat exchange)
Heat transfer
Heat transfer coefficients
Heat exchangers
Vortex flow